Thermaltake Toughpower GF3 850W power supply PS-TPD-0850FNFAGU-4
- ATX 12V v3.1
- 850 W
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Thermaltake
ATX 3.0 compatible 1650W fully modular unit with native 12VHPWR connector delivering 600W for PCIe 5.0 graphics cards, 80 Plus Gold efficiency, 140mm hydraulic bearing fan and 16 SATA connectors
Options 1650W
This 1650W fully modular power supply meets the ATX 3.0 specification and includes two native 12VHPWR connectors rated for 600W each. It delivers 80 Plus Gold efficiency with a single +12V rail and 100% Japanese capacitors. A 140mm hydraulic bearing fan provides cooling. The unit measures 180mm in length.
Verify that your motherboard and chassis support the ATX 3.0 form factor and 180mm depth before ordering. Ensure the 24-pin main connector and both 12VHPWR cables reach your graphics card and board without strain. Confirm your wall outlet supplies 100-240V at 50-60Hz. The unit provides sixteen SATA power connectors for drives.
This PSU targets enthusiasts running PCIe 5.0 graphics cards that demand dual 600W 12VHPWR connections. It also fits workstations requiring 1650W continuous output with full modular cabling. Builders with smaller cases, lower-wattage GPUs, or no need for ATX 3.0 power excursion handling should consider a lower-capacity unit.
| Brand | Thermaltake |
|---|---|
| Series | Toughpower GF3 Series |
| Model | PS-TPD-1650FNFAGU-4 |
| Type | ATX / ATX 3.0 Compatible / ATX12V |
| Maximum Power | 1650 W |
| Fans | 140mm Hydraulic Bearing Fan |
| PFC | Active |
| Main Connector | 24Pin |
| +12V Rails | Single |
| PCI-Express Connector | 12VHPWR Support Wattage: 600W |
| SATA Power Connector | 16 |
| Haswell Support | Yes |
| Max PSU Length | 180 mm |
| Modular | Full Modular |
| Power Good Signal | 100-500ms |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50Hz - 60Hz |
| Input Current | 20 - 16A |
| Output | +3.3V@25A, +5V@25A, [email protected] , [email protected] , +5VSB@3A |
| Approvals | CE/UKCA/cTUVus/TÜV/FCC/IC/BSMI/EAC/CB/BIS/KCC |
| Connectors | 1 x 24 pin ATX / 16 x SATA |
| Dimensions | 5.9" x 3.4" x 7.1" |
| Weight | 4.72 |
| Peso di spedizione | 4.76 kg |
| Dimensioni del pacco | 338 × 239 × 160 mm |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Yes, the native 12VHPWR connector is rated to deliver up to 600 W to a PCIe 5.0 graphics card.
At 180 mm long, the unit fits most ATX cases, but you should verify the maximum PSU length your chassis supports.
Sixteen SATA power connectors are provided, allowing up to 16 drives or peripherals to be connected at once.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?