Thermaltake Toughpower GF3 850W power supply PS-TPD-0850FNFAGU-4
- ATX 12V v3.1
- 850 W
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Thermaltake
ATX 3.0 compatible 1650W fully modular unit with native 12VHPWR connector delivering 600W for PCIe 5.0 graphics cards, 80 Plus Gold efficiency, 140mm hydraulic bearing fan and 16 SATA connectors
Options 1650W
This 1650W fully modular power supply meets the ATX 3.0 specification and includes two native 12VHPWR connectors rated for 600W each. It delivers 80 Plus Gold efficiency with a single +12V rail and 100% Japanese capacitors. A 140mm hydraulic bearing fan provides cooling. The unit measures 180mm in length.
Verify that your motherboard and chassis support the ATX 3.0 form factor and 180mm depth before ordering. Ensure the 24-pin main connector and both 12VHPWR cables reach your graphics card and board without strain. Confirm your wall outlet supplies 100-240V at 50-60Hz. The unit provides sixteen SATA power connectors for drives.
This PSU targets enthusiasts running PCIe 5.0 graphics cards that demand dual 600W 12VHPWR connections. It also fits workstations requiring 1650W continuous output with full modular cabling. Builders with smaller cases, lower-wattage GPUs, or no need for ATX 3.0 power excursion handling should consider a lower-capacity unit.
| Brand | Thermaltake |
|---|---|
| Series | Toughpower GF3 Series |
| Model | PS-TPD-1650FNFAGU-4 |
| Type | ATX / ATX 3.0 Compatible / ATX12V |
| Maximum Power | 1650 W |
| Fans | 140mm Hydraulic Bearing Fan |
| PFC | Active |
| Main Connector | 24Pin |
| +12V Rails | Single |
| PCI-Express Connector | 12VHPWR Support Wattage: 600W |
| SATA Power Connector | 16 |
| Haswell Support | Yes |
| Max PSU Length | 180 mm |
| Modular | Full Modular |
| Power Good Signal | 100-500ms |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50Hz - 60Hz |
| Input Current | 20 - 16A |
| Output | +3.3V@25A, +5V@25A, [email protected] , [email protected] , +5VSB@3A |
| Approvals | CE/UKCA/cTUVus/TÜV/FCC/IC/BSMI/EAC/CB/BIS/KCC |
| Connectors | 1 x 24 pin ATX / 16 x SATA |
| Dimensions | 5.9" x 3.4" x 7.1" |
| Weight | 4.72 |
| Shipping weight | 4.76 kg |
| Package size | 338 × 239 × 160 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the native 12VHPWR connector is rated to deliver up to 600 W to a PCIe 5.0 graphics card.
At 180 mm long, the unit fits most ATX cases, but you should verify the maximum PSU length your chassis supports.
Sixteen SATA power connectors are provided, allowing up to 16 drives or peripherals to be connected at once.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?