Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two black metal brackets adapt 2.5 drives to 3.5 bays with screws

Thinkstar

Thinkstar 2.5 to 3.5 Hard Drive Adapter 2 Pack

SKU CH-205Z-YDP6K

Two metal brackets convert 2.5" SATA drives to fit 3.5" bays, screws included

  • TypeNo
  • Mount any 2.5" drive in a 3.5" bay
  • Two adapters included for multiple drives
  • Screws supplied for quick, secure installation
  • Metal bracket aligns with drive screw holes
  • SATA I compatible for SSD and HDD use

Two-pack 2.5-to-3.5 drive adapter

This two-pack converts any 2.5" SSD or HDD to fit a standard 3.5" internal bay. It suits builders adding laptop-size drives to desktop chassis or servers. The metal brackets include mounting screws for both the drive and the case. Each bracket accepts drives up to the standard 2.5" form factor.

SATA interface and bay constraints

The adapter passes through the drive's native SATA connection; it does not convert the interface. Performance is limited by the drive and the host controller, not the bracket. The bracket occupies a single 3.5" bay per drive. It cannot be used where only 2.5" bays or M.2 slots are available. No power or data cables are included.

Simple screw-in installation

Align the four holes on the bracket with the drive, secure with the supplied screws, then slide the assembly into the 3.5" bay and fasten. The only common issue is using screws that are too long for the drive's threaded depth, which can damage the PCB. Verify screw length before tightening. No tools beyond a Phillips screwdriver are required.

Punti di forza

  • Mount any 2.5" drive in a 3.5" bay
  • Two adapters included for multiple drives
  • Screws supplied for quick, secure installation
  • Metal bracket aligns with drive screw holes
  • SATA I compatible for SSD and HDD use

Caratteristiche tecniche

TypeNo

Domande su questo articolo

Is this a single bracket or a multi-pack?

The listing includes two black metal brackets, each with four screw holes that match the mounting points on a 2.5" drive, plus a screw pack for securing the assembly into a 3.5" bay.

Will a SATA III SSD run at full speed when mounted in this adapter?

The bracket is a passive mechanical spacer; it does not alter the electrical connection, so a SATA III drive will negotiate its native link speed through the motherboard port.

Does the adapter work with the SATA interface used by current drives?

Yes, it is built for SATA I and later revisions, so any standard 2.5" SATA SSD or HDD fits and connects without an extra cable or converter.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.