저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two black metal brackets adapt 2.5 drives to 3.5 bays with screws

Thinkstar

Thinkstar 2.5 to 3.5 Hard Drive Adapter 2 Pack

SKU CH-205Z-YDP6K

Two metal brackets convert 2.5" SATA drives to fit 3.5" bays, screws included

  • TypeNo
  • Mount any 2.5" drive in a 3.5" bay
  • Two adapters included for multiple drives
  • Screws supplied for quick, secure installation
  • Metal bracket aligns with drive screw holes
  • SATA I compatible for SSD and HDD use

Two-pack 2.5-to-3.5 drive adapter

This two-pack converts any 2.5" SSD or HDD to fit a standard 3.5" internal bay. It suits builders adding laptop-size drives to desktop chassis or servers. The metal brackets include mounting screws for both the drive and the case. Each bracket accepts drives up to the standard 2.5" form factor.

SATA interface and bay constraints

The adapter passes through the drive's native SATA connection; it does not convert the interface. Performance is limited by the drive and the host controller, not the bracket. The bracket occupies a single 3.5" bay per drive. It cannot be used where only 2.5" bays or M.2 slots are available. No power or data cables are included.

Simple screw-in installation

Align the four holes on the bracket with the drive, secure with the supplied screws, then slide the assembly into the 3.5" bay and fasten. The only common issue is using screws that are too long for the drive's threaded depth, which can damage the PCB. Verify screw length before tightening. No tools beyond a Phillips screwdriver are required.

주요 특징

  • Mount any 2.5" drive in a 3.5" bay
  • Two adapters included for multiple drives
  • Screws supplied for quick, secure installation
  • Metal bracket aligns with drive screw holes
  • SATA I compatible for SSD and HDD use

사양

TypeNo

이 상품에 대한 질문

Is this a single bracket or a multi-pack?

The listing includes two black metal brackets, each with four screw holes that match the mounting points on a 2.5" drive, plus a screw pack for securing the assembly into a 3.5" bay.

Will a SATA III SSD run at full speed when mounted in this adapter?

The bracket is a passive mechanical spacer; it does not alter the electrical connection, so a SATA III drive will negotiate its native link speed through the motherboard port.

Does the adapter work with the SATA interface used by current drives?

Yes, it is built for SATA I and later revisions, so any standard 2.5" SATA SSD or HDD fits and connects without an extra cable or converter.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.