Transcend
Transcend 110S 512GB M.2 2280 PCIe 3.0 x4 internal SSD
512 GB M.2 2280 PCIe 3.0 x4 internal SSD with 3D NAND, up to 1700 MB/s read and 1400 MB/s write, 200 TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity512GB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4
- Up to 1700 MBps sequential read speeds for fast boot and load times
- Up to 1400 MBps sequential write speeds for quick file saves and transfers
- 250,000 IOPS random write performance for responsive multitasking and application launches
- 200TB total bytes written rating and 2,000,000 hours MTBF for long-term reliability
- NVMe 1.3 support over PCIe 3.0 x4 interface for modern platform compatibility
What this drive is
The Transcend 110S is a 512GB M.2 2280 internal SSD that uses a PCIe 3.0 x4 interface and 3D NAND flash. It delivers sequential reads up to 1700 MBps and writes up to 1400 MBps. The drive follows the NVMe 1.3 specification and includes LDPC error correction for data integrity.
Suits mainstream builds not high-end workloads
This SSD fits laptops and desktops with an M.2 slot wired for PCIe 3.0 x4. Random read reaches 160000 IOPS and write reaches 250000 IOPS. The 200TB TBW rating covers typical consumer use. Systems needing PCIe 4.0 or 5.0 bandwidth should choose a newer controller.
Deciding spec is the PCIe 3.0 x4 interface
The drive connects through a PCIe 3.0 x4 lane configuration. Peak throughput is capped by this generation. Verify the motherboard or laptop provides an M.2 2280 slot with PCIe 3.0 x4 electrical wiring before purchase.
Punti di forza
- Up to 1700 MBps sequential read speeds for fast boot and load times
- Up to 1400 MBps sequential write speeds for quick file saves and transfers
- 250,000 IOPS random write performance for responsive multitasking and application launches
- 200TB total bytes written rating and 2,000,000 hours MTBF for long-term reliability
- NVMe 1.3 support over PCIe 3.0 x4 interface for modern platform compatibility
Caratteristiche tecniche
| Brand | Transcend |
|---|---|
| Series | 110S Series |
| Model | TS512GMTE110S |
| Part Number | TS512GMTE110S |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | PCIe |
| Connector | PCIe |
| Cache | 2 unknown_modifier |
| Max Sequential Read | Up to 1700 MBps |
| Max Sequential Write | Up to 1400 MBps |
| Sustained Random 4KB Read | 81000 megabits_per_second |
| 4KB Random Read | Up to 160,000 IOPS |
| 4KB Random Write | Up to 250,000 IOPS |
| MTBF | 2,000,000 hours |
| Features | Reliability (TBW): 200TB |
| Operating Temperature | 0°C ~ +70°C |
| Height | 3.58mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 8 g (0.28 oz) |
| Package Content | SSD |
Domande su questo articolo
Does my motherboard need an M.2 2280 slot with PCIe 3.0 x4 support for this drive to work?
Yes, the drive requires an M.2 2280 slot that runs PCIe 3.0 x4 and follows the NVMe 1.3 specification.
Will this 110S drive run at its rated 1700 MBps read speed if I install it in an older PCIe 2.0 M.2 slot?
It will operate but the interface will limit throughput to PCIe 2.0 speeds, so the 1700 MBps figure will not be reached.
After installation, how can I verify the SSD is delivering the advertised 160000 IOPS random read performance?
Run a 4 KB random read benchmark in a tool such as CrystalDiskMark and confirm the result approaches 160000 IOPS.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
