We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular M.2 2280 SSD with black label and gold edge connector

Transcend

Transcend 110S 512GB M.2 2280 PCIe 3.0 x4 internal SSD

SKU CH-NWTN-WQDN1

512 GB M.2 2280 PCIe 3.0 x4 internal SSD with 3D NAND, up to 1700 MB/s read and 1400 MB/s write, 200 TBW endurance

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity512GB
  • Memory Components3D NAND
  • InterfacePCI-Express 3.0 x4
  • Up to 1700 MBps sequential read speeds for fast boot and load times
  • Up to 1400 MBps sequential write speeds for quick file saves and transfers
  • 250,000 IOPS random write performance for responsive multitasking and application launches
  • 200TB total bytes written rating and 2,000,000 hours MTBF for long-term reliability
  • NVMe 1.3 support over PCIe 3.0 x4 interface for modern platform compatibility

What this drive is

The Transcend 110S is a 512GB M.2 2280 internal SSD that uses a PCIe 3.0 x4 interface and 3D NAND flash. It delivers sequential reads up to 1700 MBps and writes up to 1400 MBps. The drive follows the NVMe 1.3 specification and includes LDPC error correction for data integrity.

Suits mainstream builds not high-end workloads

This SSD fits laptops and desktops with an M.2 slot wired for PCIe 3.0 x4. Random read reaches 160000 IOPS and write reaches 250000 IOPS. The 200TB TBW rating covers typical consumer use. Systems needing PCIe 4.0 or 5.0 bandwidth should choose a newer controller.

Deciding spec is the PCIe 3.0 x4 interface

The drive connects through a PCIe 3.0 x4 lane configuration. Peak throughput is capped by this generation. Verify the motherboard or laptop provides an M.2 2280 slot with PCIe 3.0 x4 electrical wiring before purchase.

Highlights

  • Up to 1700 MBps sequential read speeds for fast boot and load times
  • Up to 1400 MBps sequential write speeds for quick file saves and transfers
  • 250,000 IOPS random write performance for responsive multitasking and application launches
  • 200TB total bytes written rating and 2,000,000 hours MTBF for long-term reliability
  • NVMe 1.3 support over PCIe 3.0 x4 interface for modern platform compatibility

Specifications

BrandTranscend
Series110S Series
ModelTS512GMTE110S
Part NumberTS512GMTE110S
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity512GB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4
ProtocolPCIe
ConnectorPCIe
Cache2 unknown_modifier
Max Sequential ReadUp to 1700 MBps
Max Sequential WriteUp to 1400 MBps
Sustained Random 4KB Read81000 megabits_per_second
4KB Random ReadUp to 160,000 IOPS
4KB Random WriteUp to 250,000 IOPS
MTBF2,000,000 hours
FeaturesReliability (TBW): 200TB
Operating Temperature0°C ~ +70°C
Height3.58mm
Width22.00mm
Depth80.00mm
Weight8 g (0.28 oz)
Package ContentSSD

Questions about this item

Does my motherboard need an M.2 2280 slot with PCIe 3.0 x4 support for this drive to work?

Yes, the drive requires an M.2 2280 slot that runs PCIe 3.0 x4 and follows the NVMe 1.3 specification.

Will this 110S drive run at its rated 1700 MBps read speed if I install it in an older PCIe 2.0 M.2 slot?

It will operate but the interface will limit throughput to PCIe 2.0 speeds, so the 1700 MBps figure will not be reached.

After installation, how can I verify the SSD is delivering the advertised 160000 IOPS random read performance?

Run a 4 KB random read benchmark in a tool such as CrystalDiskMark and confirm the result approaches 160000 IOPS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.