Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Small black 40 by 15 mm DC axial fan with three-pin connector

Zyvpee

Zyvpee 109P0424H7D28 24V 0.08A 40x15mm 3-pin case fan

SKU CH-71C5-6ZH2S

A 40x15mm DC axial case fan with ball bearing and 3-pin connector runs on 24V at 0.08A

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 40 mm frame fits tight chassis spaces
  • 24 V 0.08 A DC motor runs on industrial power rails
  • Ball bearing design extends operating life
  • Three-pin connector enables speed monitoring
  • Non-LED black finish keeps builds visually clean

Compact 40 mm DC axial fan

The Zyvpee 109P0424H7D28 is a 40 by 15 millimetre case fan built for tight chassis spaces. It runs on a 24 volt supply and draws 0.08 amperes through a standard three-pin connector. The black frame carries no lighting, suiting builders who prefer a clean look. Ball bearings support the rotor for reliable rotation.

Thermals and acoustics at idle

Ball-bearing construction keeps friction low during typical airflow delivery. The small frame moves air through restricted vents without demanding high voltage. Current draw stays at 0.08 amperes, limiting heat contribution to the power rail. Noise remains subdued in normal operation thanks to the compact motor design.

Behaviour under sustained load

Continuous 24 volt operation keeps speed stable across long sessions. The ball bearing tolerates extended duty cycles without the wear seen in sleeve alternatives. Three-pin wiring supplies constant voltage rather than pulsed control, so airflow does not fluctuate. The 4015 form factor fits Fanuc-style mounts that require this exact footprint.

Punti di forza

  • 40 mm frame fits tight chassis spaces
  • 24 V 0.08 A DC motor runs on industrial power rails
  • Ball bearing design extends operating life
  • Three-pin connector enables speed monitoring
  • Non-LED black finish keeps builds visually clean

Caratteristiche tecniche

BrandZyvpee
Series109P0424H7D28
Model109P0424H7D28
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions40*15mm

Domande su questo articolo

How do I connect the 3-pin connector to a 24V fan header, and which wire is often misidentified?

Match the three wires to the header's ground, 24V, and tach pins; the tach wire is the one most often swapped.

What part of the 40x15mm ball-bearing fan wears out first and requires replacement?

The ball bearing itself is the wear item; once it develops noise or play the whole 109P0424H7D28 fan is replaced.

At 0.08A draw, what thermal limit appears first during continuous 24V operation?

The motor's insulation class sets the maximum winding temperature; sustained load will hit that limit before the bearing fails.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.