暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black 40 by 15 mm DC axial fan with three-pin connector

Zyvpee

Zyvpee 109P0424H7D28 24V 0.08A 40x15mm 3-pin case fan

SKU CH-71C5-6ZH2S

A 40x15mm DC axial case fan with ball bearing and 3-pin connector runs on 24V at 0.08A

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 40 mm frame fits tight chassis spaces
  • 24 V 0.08 A DC motor runs on industrial power rails
  • Ball bearing design extends operating life
  • Three-pin connector enables speed monitoring
  • Non-LED black finish keeps builds visually clean

Compact 40 mm DC axial fan

The Zyvpee 109P0424H7D28 is a 40 by 15 millimetre case fan built for tight chassis spaces. It runs on a 24 volt supply and draws 0.08 amperes through a standard three-pin connector. The black frame carries no lighting, suiting builders who prefer a clean look. Ball bearings support the rotor for reliable rotation.

Thermals and acoustics at idle

Ball-bearing construction keeps friction low during typical airflow delivery. The small frame moves air through restricted vents without demanding high voltage. Current draw stays at 0.08 amperes, limiting heat contribution to the power rail. Noise remains subdued in normal operation thanks to the compact motor design.

Behaviour under sustained load

Continuous 24 volt operation keeps speed stable across long sessions. The ball bearing tolerates extended duty cycles without the wear seen in sleeve alternatives. Three-pin wiring supplies constant voltage rather than pulsed control, so airflow does not fluctuate. The 4015 form factor fits Fanuc-style mounts that require this exact footprint.

特長

  • 40 mm frame fits tight chassis spaces
  • 24 V 0.08 A DC motor runs on industrial power rails
  • Ball bearing design extends operating life
  • Three-pin connector enables speed monitoring
  • Non-LED black finish keeps builds visually clean

仕様

BrandZyvpee
Series109P0424H7D28
Model109P0424H7D28
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions40*15mm

この商品に関する質問

How do I connect the 3-pin connector to a 24V fan header, and which wire is often misidentified?

Match the three wires to the header's ground, 24V, and tach pins; the tach wire is the one most often swapped.

What part of the 40x15mm ball-bearing fan wears out first and requires replacement?

The ball bearing itself is the wear item; once it develops noise or play the whole 109P0424H7D28 fan is replaced.

At 0.08A draw, what thermal limit appears first during continuous 24V operation?

The motor's insulation class sets the maximum winding temperature; sustained load will hit that limit before the bearing fails.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。