Zyvpee
Zyvpee 1204KL-04W-B59 30x10mm 12V 3-pin case fan
A 30×10 mm ball-bearing case fan running at 12 V with a three-pin connector
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesMINI Cooling
- Ball-bearing reliability for long service life
- 12 V, 0.12 A draw keeps power use low
- 30 mm × 10 mm frame fits tight spaces
- Three-pin connector enables speed monitoring
- Non-LED black design stays visually discreet
Zyvpee 30 mm Micro Case Fan
The Zyvpee 1204KL-04W-B59 is a 30 by 10 millimetre DC micro cooler designed for tight spaces inside a computer chassis. It runs on 12 volts and draws 0.12 amps through a three-pin power connector. The black frame houses a ball bearing for durable rotation. No LED lighting is included.
Suits Compact Builds Needing Spot Airflow
Builders working on small form factor systems, embedded boards or custom brackets where a standard 120 millimetre fan cannot fit will find this size useful. The three-wire connection allows basic speed monitoring but not PWM control. Buyers who need higher static pressure, larger air volume or four-pin regulation should look at something else.
Simple Three-Pin Mount in Confined Areas
Installation consists of aligning the four screw holes and connecting the three-pin header to a compatible motherboard or controller. The 30 millimetre footprint leaves almost no margin for error when routing the short lead. The most common issue is discovering the connector cannot reach the header without an extension cable.
Punti di forza
- Ball-bearing reliability for long service life
- 12 V, 0.12 A draw keeps power use low
- 30 mm × 10 mm frame fits tight spaces
- Three-pin connector enables speed monitoring
- Non-LED black design stays visually discreet
Caratteristiche tecniche
| Brand | Zyvpee |
|---|---|
| Series | 1204KL-04W-B59 |
| Model | 1204KL-04W-B59 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | MINI Cooling |
| Dimensions | 30*10MM |
Domande su questo articolo
What motherboard header do I need to run the 3-pin connector on this 12 V fan?
A standard 3-pin fan header supplying 12 V DC will power the 1204KL-04W-B59; the third wire provides tachometer feedback to the board.
Will the 30 mm frame and 10 mm depth fit in the same mounting holes as my older 3010 fan?
Yes — the 30*10 mm dimensions match the common 3010 footprint, so existing screw holes line up without modification.
How can I confirm the ball-bearing fan is spinning at the correct speed after installation?
Check the RPM reported in BIOS or monitoring software; the tachometer signal on the third wire lets the motherboard display real-time speed.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.0000105BTC
Disponibile