Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Small black 55 by 15 mm case fan with three-pin connector

Zyvpee

Zyvpee GM1255PHV1-A 55mm 12V 1.7W 3-pin case fan

SKU CH-3D33-TDV5E

55 mm Maglev CPU cooler fan runs at up to 1600 RPM on 12 V, drawing 1.7 W through a 3-pin connector

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Compact 55 mm frame fits tight builds
  • Maglev bearing reduces friction for longer life
  • Low 1.7 W draw keeps power budget lean
  • 3-pin connector works with standard headers
  • Sub-1600 RPM limit keeps acoustics low

Compact 55 mm case fan for tight builds

The Zyvpee GM1255PHV1-A is a 55 mm by 15 mm case fan designed for CPU coolers and projector cooling where space is limited. It runs on 12 V power and draws 1.7 W, spinning at up to 1600 RPM with a Maglev bearing. The black, non-LED frame suits understated builds.

Check mounting holes and header type

Verify that your cooler or chassis has 55 mm mounting points and a 3-pin fan header before ordering. The fan uses a standard three-wire connector without PWM control, so speed regulation depends on voltage. Clearance of 15 mm in depth is required for the frame to sit flush.

Maglev bearing reduces long-term noise

The magnetic levitation bearing eliminates physical contact between the rotor and stator, lowering friction and wear compared to sleeve or ball alternatives. This design helps maintain consistent RPM and quieter operation over extended use. No additional cables, adapters or software are included in the package.

Punti di forza

  • Compact 55 mm frame fits tight builds
  • Maglev bearing reduces friction for longer life
  • Low 1.7 W draw keeps power budget lean
  • 3-pin connector works with standard headers
  • Sub-1600 RPM limit keeps acoustics low

Caratteristiche tecniche

BrandZyvpee
SeriesGM1255
ModelGM1255PHV1-A
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions55 *15 mm

Domande su questo articolo

Does the Zyvpee GM1255PHV1-A ship with mounting screws or a fan filter?

The fan is supplied as a standalone unit; screws and filters are not included and must be sourced separately.

How do I choose between the available versions of this 55 mm Maglev cooler fan?

Only the GM1255PHV1-A variant is offered, running at 12 V with a 3-pin connector and a maximum speed below 1600 RPM.

What does the sub-1600 RPM rating mean for actual airflow in a compact projector or CPU cooler?

At up to 1600 RPM the 55 mm by 15 mm Maglev impeller delivers focused airflow for tight spaces while drawing 1.7 W at 12 V.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.