我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Small black 55 by 15 mm case fan with three-pin connector

Zyvpee

Zyvpee GM1255PHV1-A 55mm 12V 1.7W 3-pin case fan

SKU CH-3D33-TDV5E

55 mm Maglev CPU cooler fan runs at up to 1600 RPM on 12 V, drawing 1.7 W through a 3-pin connector

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Compact 55 mm frame fits tight builds
  • Maglev bearing reduces friction for longer life
  • Low 1.7 W draw keeps power budget lean
  • 3-pin connector works with standard headers
  • Sub-1600 RPM limit keeps acoustics low

Compact 55 mm case fan for tight builds

The Zyvpee GM1255PHV1-A is a 55 mm by 15 mm case fan designed for CPU coolers and projector cooling where space is limited. It runs on 12 V power and draws 1.7 W, spinning at up to 1600 RPM with a Maglev bearing. The black, non-LED frame suits understated builds.

Check mounting holes and header type

Verify that your cooler or chassis has 55 mm mounting points and a 3-pin fan header before ordering. The fan uses a standard three-wire connector without PWM control, so speed regulation depends on voltage. Clearance of 15 mm in depth is required for the frame to sit flush.

Maglev bearing reduces long-term noise

The magnetic levitation bearing eliminates physical contact between the rotor and stator, lowering friction and wear compared to sleeve or ball alternatives. This design helps maintain consistent RPM and quieter operation over extended use. No additional cables, adapters or software are included in the package.

商品特色

  • Compact 55 mm frame fits tight builds
  • Maglev bearing reduces friction for longer life
  • Low 1.7 W draw keeps power budget lean
  • 3-pin connector works with standard headers
  • Sub-1600 RPM limit keeps acoustics low

商品規格

BrandZyvpee
SeriesGM1255
ModelGM1255PHV1-A
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions55 *15 mm

商品問答

Does the Zyvpee GM1255PHV1-A ship with mounting screws or a fan filter?

The fan is supplied as a standalone unit; screws and filters are not included and must be sourced separately.

How do I choose between the available versions of this 55 mm Maglev cooler fan?

Only the GM1255PHV1-A variant is offered, running at 12 V with a 3-pin connector and a maximum speed below 1600 RPM.

What does the sub-1600 RPM rating mean for actual airflow in a compact projector or CPU cooler?

At up to 1600 RPM the 55 mm by 15 mm Maglev impeller delivers focused airflow for tight spaces while drawing 1.7 W at 12 V.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。