暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Aqua duplex fiber patch cord with two LC connectors on each end, LSZH jacket, 6.56 ft long

10Gtek

10Gtek LC-LC OM3 Duplex 50/125 LSZH 6.56 ft

SKU CH-9DB0-VSEC1

Duplex OM3 multimode patch cord with LC connectors, LSZH jacket and 7.5 mm bend radius for 10 GbE links

  • TypeFiber
  • Length6.56 ft.
  • Connector Number2

Option 1 Pack

Length 6.6 ft.

  • Low insertion loss of .3 dB tested on every cable
  • 5 mm bend radius handles tight routing four times better than standard fiber
  • LSZH jacket reduces toxic smoke in fire-sensitive areas
  • Ceramic ferrules with PC polish ensure reliable 10 GbE multimode links
  • Compliant with TIA 568-C.3, IEC 60793-2-10 and RoHS standards

LC Duplex Cable for SFP Links

This 6.56 ft OM3 multimode patch cord uses LC connectors on both ends for direct SFP transceiver connections. It supports 10 Gigabit Ethernet and Fibre Channel speeds in data-centre and enterprise networks. The LSZH jacket meets fire-safety requirements for indoor routing.

LSZH Build with Bend-Insensitive Core

The 2.0 mm low-smoke zero-halogen jacket reduces toxic emissions in plenum spaces. Bend-insensitive fibre tolerates a 7.5 mm radius, simplifying runs through tight trays and around corners. Zirconia ceramic ferrules and strain-relief boots protect the 50/125 µm core during repeated mating.

Factory-Tested for Low Loss

Every cord passes 100 % insertion-loss testing at 0.3 dB and return-loss testing at 35 dB. Compliance with TIA/EIA 568-C.3, IEC 60793-2-10 A1b, CE and RoHS confirms consistent performance. Backwards compatibility extends to legacy 100/1000 Mbps links without extra configuration.

特長

  • Low insertion loss of .3 dB tested on every cable
  • 5 mm bend radius handles tight routing four times better than standard fiber
  • LSZH jacket reduces toxic smoke in fire-sensitive areas
  • Ceramic ferrules with PC polish ensure reliable 10 GbE multimode links
  • Compliant with TIA 568-C.3, IEC 60793-2-10 and RoHS standards

仕様

TypeFiber
Length6.56 ft.
Connector Number2

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What interface standard does the OM3 duplex cable support and what data rate does it cap at in practice?

The OM3 duplex cable supports 10GBase-S/LR4/LRM and Fibre Channel up to 1200-MX, capping practical throughput at 10 Gigabit per second for short-range links.

What physical space and connector type are required to fit this patch cord?

The cord uses duplex LC connectors with a 2.0 mm outer diameter jacket and needs only a 7.5 mm bend radius for routing in tight panels.

How is the cable installed and which step is most often missed?

Insert each LC connector into the SFP transceiver until the latch clicks, then verify the duplex polarity matches the link; the polarity check is the step most often skipped.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。