暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact all-metal ceramic heating block with quick-swap nozzle, titanium heat sink, copper-alloy tip

A Ceramic Heating Block Hotend Kit Unicorn Quick Swap Nozzle 350°C for K2 Plus 3D Printers Accessory

SKU CH-0V3G-V4EBN

All-metal ceramic heating block with quick-swap nozzle reaches 350 °C for high-temperature filaments on K2 Plus printers

  • Type01
  • Compatible SystemFor K2 PLUS
  • SpecificationFor K2 PLUS
  • FeaturesFor K2 PLUS
  • Custom-fit for K2 Plus enables quick, hassle-free hotend replacement
  • Titanium-alloy heat sink plus hardened-steel nozzle withstand 350 °C for high-performance filaments
  • 360° ceramic heater delivers uniform heat transfer across the block
  • Burr-free unicorn nozzle with polished walls reduces clogging risk
  • Tightly sealed joints prevent filament leakage for consistent print quality

K2 Plus Ceramic Hotend Kit

This all-metal integrated ceramic heating block kit is designed specifically for the Creality K2 Plus 3D printer. It provides a direct replacement hotend assembly capable of reaching 350 °C for high-temperature filament printing.

Titanium Heat Sink and Quick-Swap Nozzle

A titanium alloy heat sink reduces heat conduction upward while the unicorn nozzle uses a hardened steel tip inside a copper alloy body. The quick-swap design allows nozzle changes without tools once the hotend has cooled below 50 °C.

350 °C Limit and 360 °C Ceramic Heater

The 360 ° ceramic heater delivers uniform heat distribution up to the kit's 350 °C maximum operating temperature. This ceiling supports materials such as PLA, ABS, PETG, TPU, PC and PA-CF but excludes filaments requiring higher extrusion temperatures.

特長

  • Custom-fit for K2 Plus enables quick, hassle-free hotend replacement
  • Titanium-alloy heat sink plus hardened-steel nozzle withstand 350 °C for high-performance filaments
  • 360° ceramic heater delivers uniform heat transfer across the block
  • Burr-free unicorn nozzle with polished walls reduces clogging risk
  • Tightly sealed joints prevent filament leakage for consistent print quality

仕様

BrandA
Type01
Compatible SystemFor K2 PLUS
SpecificationFor K2 PLUS
FeaturesFor K2 PLUS

この商品に関する質問

What temperature does the 360° ceramic heater support?

The ceramic heater reaches 350°C, allowing printing with PLA, ABS, PETG, TPU, PC and PA-CF filaments.

What are the package dimensions for this hotend kit?

The kit measures 4.17 x 1.69 x 1.3 inches and weighs 2.11 ounces.

What must be done before swapping the hotend on a K2 Plus?

Power off the printer and wait until the nozzle cools below 50°C; then re-level the bed and apply adhesive for first-layer adhesion.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。