暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, 288 gold pins, no heat spreader

A-Tech

A-Tech 128GB DDR4 2933MHz ECC LRDIMM server RAM

SKU CH-Q3R1-G84C4

A 128 GB DDR4 2933 MHz ECC load-reduced DIMM for compatible HPE servers

  • Capacity128GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • 128GB single module expands server memory capacity for heavy workloads
  • DDR4 2933MHz PC4-23400 speed supports high-throughput data processing
  • ECC load-reduced design maintains data integrity under sustained operation
  • 2V standard voltage reduces power draw per module
  • 288-pin LRDIMM form factor fits compatible HP/HPE server slots

128GB DDR4 2933MHz ECC LRDIMM for HPE Servers

This 128GB DDR4 module runs at 2933MHz with CL21 latency and 1.20V operation. It uses a 288-pin LRDIMM form factor with 4DRx4/4Rx4 rank configuration and includes ECC error correction. The module is built as a direct replacement for HPE part numbers P18454-B21, P11057-1A1, P11057-6A1, P19047-B21, P19047-H21, and P19047-K21.

Upgrading from lower-capacity DDR4 LRDIMMs

Replacing smaller LRDIMMs with this 128GB module increases total memory capacity per slot, which is valuable for virtualization hosts and database servers that benefit from fewer populated slots. The jump is worth it when your workload demands maximum density and your platform supports 128GB LRDIMMs at 2933MHz. It does not suit systems limited to RDIMM or lower-density modules.

Fits 288-pin DDR4 LRDIMM server slots

The module installs in standard 288-pin DDR4 DIMM slots that support load-reduced memory. It requires a server platform qualified for 128GB LRDIMMs at 2933MHz with 1.20V operation. No heat spreader is present, so airflow across the module must be provided by the system chassis. Population rules and maximum per-channel limits depend on the specific server model.

特長

  • 128GB single module expands server memory capacity for heavy workloads
  • DDR4 2933MHz PC4-23400 speed supports high-throughput data processing
  • ECC load-reduced design maintains data integrity under sustained operation
  • 2V standard voltage reduces power draw per module
  • 288-pin LRDIMM form factor fits compatible HP/HPE server slots

仕様

BrandA-Tech
SeriesHP/HPE RAM Equivalent Replacement Memory
ModelP18454-B21, P11057-1A1, P11057-6A1, P19047-B21, P19047-H21, P19047-K21
Part NumberP18454-B21, P11057-1A1, P11057-6A1, P19047-B21, P19047-H21, P19047-K21
Capacity128GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4DRx4/4Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesEquivalent Replacement for HP P18454-B21, P11057-1A1, P11057-6A1, P19047-B21, P19047-H21, P19047-K21

この商品に関する質問

Will the 288-pin DDR4 LRDIMM fit my server's memory slots?

This module uses the standard 288-pin DDR4 DIMM form factor and requires a slot that supports Load Reduced ECC memory at 1.2V.

What is the correct way to seat the 128GB module so the ECC LRDIMM initialises?

Align the notch with the slot key, press straight down until both side clips click, and confirm the BIOS detects the full 128GB at 2933MHz.

When should I plan to replace this 128GB DDR4 2933MHz ECC LRDIMM?

Replace it if memory diagnostics report uncorrectable ECC errors, the server fails POST with this module installed, or a firmware update requires a different rank configuration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。