暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 ECC RDIMM sticks, 288-pin, black chips, silver labels

A-Tech

A-Tech 16GB (2x8GB) DDR4 2133 ECC RDIMM 1Rx4 Server RAM

SKU CH-A95V-NJX6W

Dual-channel 16 GB DDR4 2133 MHz ECC RDIMM kit with CL15 latency and 1.2 V operation for servers and workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit doubles capacity for heavier workloads
  • ECC registered design detects and corrects data errors in servers
  • 2133 MHz DDR4 speed with CL15 latency accelerates memory throughput
  • 20 V standard voltage reduces power draw per module
  • 288-pin RDIMM form factor fits compatible server and workstation slots

16GB DDR4 2133 ECC RDIMM Kit

This 16GB kit contains two 8GB DDR4 2133 MHz registered DIMMs with ECC and a CAS latency of 15. It is built for servers and workstations that require registered memory and cannot use standard desktop or laptop modules. The dual-channel configuration helps improve throughput on compatible platforms.

Upgrade from non-ECC or lower capacity

Replaces unbuffered or non-ECC memory in systems that mandate registered DIMMs for data integrity. The jump is worth it when your workload demands error correction and the motherboard specifies RDIMM support at this speed and rank configuration. It will not fit desktop or laptop boards that accept only unbuffered memory.

Straightforward DIMM installation

The 288-pin modules seat in standard DDR4 RDIMM slots at 1.2V. Follow the system manual for correct channel population and seating order to avoid boot failures. Mixing ranks or speeds, or installing in unsupported desktop boards, are the most common causes of detection issues.

特長

  • 16 GB dual-channel kit doubles capacity for heavier workloads
  • ECC registered design detects and corrects data errors in servers
  • 2133 MHz DDR4 speed with CL15 latency accelerates memory throughput
  • 20 V standard voltage reduces power draw per module
  • 288-pin RDIMM form factor fits compatible server and workstation slots

仕様

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 1Rx4 PC4-2133P-R
Capacity16GB (2 x 8GB)
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 288-pin DDR4 RDIMM form factor fit my server motherboard?

These modules use the standard 288-pin DDR4 RDIMM layout required by compatible server and workstation boards.

What is the correct seating order for the dual-channel 2x8 GB kit?

Install one module in each memory channel according to the motherboard manual; the common mistake is populating both modules in the same channel.

When should the ECC registered DIMMs be replaced?

Replace modules only if memory diagnostics report uncorrectable ECC errors or the system logs persistent correctable error thresholds.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。