暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 DIMM sticks, 288-pin, matte black chips, silver contacts

A-Tech

A-Tech 16GB 2x8GB DDR4 3200 ECC UDIMM 1Rx8 CL22 1.2V 288-Pin Server RAM

SKU CH-56DW-2R8C2

16 GB DDR4 ECC UDIMM kit at 3200 MHz with CL22 latency for servers and workstations

  • CAS LatencyCL22
  • Rank1Rx8
  • 16GB DDR4 3200 ECC kit boosts server responsiveness
  • CL22 single-rank modules speed up data access
  • 2V standard voltage reduces power draw
  • 288-pin UDIMM fits compatible server boards
  • Rigorously tested for reliable workload handling

Server DDR4 ECC UDIMM kit

This 16 GB kit contains two 8 GB DDR4 3200 MHz ECC UDIMM modules with a 288-pin layout. Each stick runs at 1.2 V with a CAS latency of CL22 and is organised as single-rank 1Rx8. The memory is built for servers and workstations that require error-correcting unbuffered DIMMs.

Suited to ECC server platforms only

It fits systems that specifically support DDR4 ECC unbuffered memory and will not work in standard desktop or laptop computers. Buyers who need non-ECC modules or memory for consumer motherboards should look elsewhere. Verify your platform’s qualified vendor list before ordering.

Straightforward DIMM installation

Align the notch with the slot key, press firmly until the retention clips click, and follow the system manual for correct channel population. The most common issue is purchasing this kit for a board that only accepts non-ECC or registered DIMMs, which prevents the system from posting.

特長

  • 16GB DDR4 3200 ECC kit boosts server responsiveness
  • CL22 single-rank modules speed up data access
  • 2V standard voltage reduces power draw
  • 288-pin UDIMM fits compatible server boards
  • Rigorously tested for reliable workload handling

仕様

CAS LatencyCL22
Rank1Rx8

この商品に関する質問

What motherboard slot and memory type does this 288-pin DDR4 ECC UDIMM kit require?

The kit uses 288-pin DDR4 DIMM slots and needs a server or workstation board that supports ECC unbuffered memory.

Will the CL22 3200 MHz modules run at their rated speed if I keep older DDR4 ECC UDIMMs installed in the same system?

The system will typically clock all installed DDR4 ECC UDIMMs to the lowest common speed and latency, so older modules may limit the 3200 MHz CL22 kit.

How can I confirm the 16 GB kit is recognised as two 8 GB single-rank modules running at 3200 MHz with ECC active?

Check the BIOS memory information or use a tool such as dmidecode to verify 2 x 8 GB, 1Rx8, 3200 MT/s, and ECC enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。