暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 16GB DDR3 1600MHz ECC RDIMM 2Rx4 Server RAM

SKU CH-T69Y-NG51B

16GB DDR3 1600MHz ECC registered DIMM with 2Rx4 organisation for server upgrades

  • Capacity16GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity handles heavy server workloads
  • DDR3 1600 MHz speed delivers PC3-12800 bandwidth
  • ECC RDIMM design detects and corrects data errors
  • 2Rx4 registered architecture stabilises multi-module configurations
  • 5 V standard voltage matches DDR3 platform requirements

Server RDIMM

This is a 16GB DDR3 1600MHz ECC registered DIMM built for server and workstation platforms. It operates at 1.5V with CL11 latency and uses a 2Rx4 organisation on a 240-pin module.

Registered ECC systems

It suits administrators upgrading Dell servers that list part numbers such as 370-21961 or 0284FC and need registered ECC memory. It is not for desktops or laptops that require unbuffered non-ECC modules, nor for platforms that cannot accept registered DIMMs.

2Rx4 registered ECC

The module is a 2Rx4 registered ECC DDR3 DIMM; this rank and buffering combination determines whether the system’s memory controller will recognise and populate the slot correctly.

特長

  • 16 GB capacity handles heavy server workloads
  • DDR3 1600 MHz speed delivers PC3-12800 bandwidth
  • ECC RDIMM design detects and corrects data errors
  • 2Rx4 registered architecture stabilises multi-module configurations
  • 5 V standard voltage matches DDR3 platform requirements

仕様

BrandA-Tech
Capacity16GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Does my server need DDR3 240-pin registered DIMM slots to use this 16GB 1600MHz module?

Yes, this module requires a server or workstation motherboard with DDR3 240-pin RDIMM slots supporting ECC registered memory at 1.5V.

Can I mix this 2Rx4 ECC RDIMM with existing 1Rx4 or 2Rx8 modules in the same channel?

Mixing ranks per channel depends on your platform's memory controller; consult the system manual for supported rank combinations and population rules.

How do I confirm the module is running at 1600MHz with ECC active after installation?

Enter the BIOS or use a tool like CPU-Z or dmidecode to verify speed shows 1600MHz (PC3-12800) and ECC status reports as enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。