暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3L ECC registered DIMM with black chips, 16GB 1333MHz 4Rx4

A-Tech

A-Tech 16GB DDR3L 1333MHz ECC RDIMM 4Rx4 Server Memory

SKU CH-00PV-6CRW0

16GB DDR3L 1333MHz ECC registered server memory module with 4Rx4 organisation and 1.35V low-voltage operation

  • Capacity16GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR3L 1333MHz capacity handles heavy server workloads
  • ECC RDIMM registered design protects data integrity in critical applications
  • Low 1.35V DDR3L voltage reduces power draw and heat output
  • 4Rx4 rank configuration maximises density on 240-pin DIMM slots
  • Direct replacement for Hynix HMT42GR7A/B/CMR4A-H9 modules

16GB DDR3L ECC RDIMM for Servers

This 16GB registered DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 4Rx4 organisation and major-brand chips on a 240-pin DIMM. The stick is built for server and workstation platforms that require ECC error correction and registered signalling.

Replaces Hynix HMT42GR7A/B/CMR4A-H9

The module is a direct equivalent for three specific Hynix part numbers used in compatible systems. Swapping to this unit makes sense when a slot is empty or a failed stick must be replaced with an identical-capacity registered DIMM. Builders expanding beyond the board’s supported rank-per-channel limit should verify the manual first.

DDR3L voltage and registered signalling limits

The 1.35V low-voltage standard reduces power draw but requires a memory controller that explicitly supports DDR3L. Registered buffering adds a clock cycle of latency and restricts maximum module count per channel. Systems limited to unbuffered UDIMMs or higher-voltage DDR3 cannot use this memory.

特長

  • 16GB DDR3L 1333MHz capacity handles heavy server workloads
  • ECC RDIMM registered design protects data integrity in critical applications
  • Low 1.35V DDR3L voltage reduces power draw and heat output
  • 4Rx4 rank configuration maximises density on 240-pin DIMM slots
  • Direct replacement for Hynix HMT42GR7A/B/CMR4A-H9 modules

仕様

BrandA-Tech
Capacity16GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Will this 240-pin DDR3L module fit my server's RDIMM slots?

Yes, the module uses the standard 240-pin DIMM form factor and registered DDR3L interface required for compatible server RDIMM slots.

What is the correct seating procedure for this registered ECC module?

Align the notch with the slot key, press firmly until both side latches click shut, and verify the system detects the full 16GB capacity at 1333MHz.

Does the 1.35V DDR3L voltage require any future adjustment or replacement?

No, the 1.35V low-voltage specification is fixed; the module runs at this voltage for its lifetime without needing adjustment or scheduled replacement.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。