暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 16GB DDR4 2400 CL17 1.2V 288-pin DIMM desktop RAM

SKU CH-M1KE-GY5WK

A 16 GB DDR4 2400 MHz desktop DIMM with CL17 latency and 1.2 V operation for compatible Dell systems

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity lifts multitasking headroom for demanding workloads
  • DDR4 2400 speed moves data at 19200 MB/s for snappy response
  • CL17 latency keeps timing tight for smooth operation
  • 20 V standard voltage reduces power draw and heat
  • 288-pin DIMM fits straight into compatible desktop slots

Desktop DDR4 2400 16GB Module

This 16GB A-Tech DIMM runs at DDR4 2400 (PC4-19200) with CL17 latency and standard 1.2V operation. It uses an unbuffered, non-ECC design built on major-brand chips. The 288-pin form factor fits desktop motherboards that support DDR4 memory. Intended as a direct replacement for Dell part numbers 370-ADPT, A9321912 and SNPYXC0VC/16G.

Suits Dell desktop upgrades and general DDR4 systems

Owners of compatible Dell desktops needing a 16GB module matching the listed part numbers will find this a verified match. Builders adding capacity to any DDR4 platform accepting unbuffered UDIMMs at 2400 MT/s can also use it. Systems requiring ECC, registered DIMMs, lower voltage or a different DDR generation should select another module.

Deciding spec: DDR4 2400 CL17 1.2V UDIMM

The single specification that determines fit is the DDR4 2400 CL17 1.2V unbuffered non-ECC UDIMM standard. Your motherboard must support DDR4 at this speed, latency and voltage in an unbuffered configuration. If the board requires ECC, registered, a different voltage or another DDR generation, this module will not work.

特長

  • 16 GB capacity lifts multitasking headroom for demanding workloads
  • DDR4 2400 speed moves data at 19200 MB/s for snappy response
  • CL17 latency keeps timing tight for smooth operation
  • 20 V standard voltage reduces power draw and heat
  • 288-pin DIMM fits straight into compatible desktop slots

仕様

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

この商品に関する質問

Will the 1.2V DDR4 module need any voltage adjustment or replacement after extended use?

The module runs at the standard 1.20V DDR4 voltage with no user adjustment required; it is a solid-state component with no moving parts, so no scheduled replacement is needed.

What limits sustained throughput on this CL17 2400MHz stick?

The CAS latency of CL17 at 2400 MHz sets the primary timing ceiling for sustained data transfers.

How much heat and power does the 16GB DIMM produce during all-day operation?

At the standard 1.20V DDR4 voltage the 16GB module draws minimal power and generates low heat, requiring only normal case airflow.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。