暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge contacts and black memory chips on both sides

A-Tech

A-Tech 16GB DDR4 2400 ECC UDIMM 2Rx8 934798-001 Server Memory

SKU CH-NT8B-RD7V9

16 GB DDR4 2400 ECC unbuffered UDIMM with CL17 latency for server upgrades

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 16 GB capacity handles heavier server workloads
  • DDR4 2400 speed with CL17 latency for responsive data access
  • ECC unbuffered design detects and corrects memory errors
  • 20 V standard voltage keeps power draw low
  • 288-pin DIMM form factor fits compatible HP 934798-001 slots

16GB DDR4 2400 ECC UDIMM Server Memory

This A-Tech module delivers 16GB of DDR4 2400 memory with ECC error correction for server and workstation systems. It operates at 1.20V with CL17 latency in an unbuffered 2Rx8 configuration. The 288-pin DIMM is built as a compatible replacement for HP part 934798-001 and undergoes quality assurance testing for dependable performance.

Suits ECC-capable servers

This memory fits systems that accept unbuffered ECC UDIMMs at the PC4-19200 speed grade. Builders whose platforms require registered or load-reduced DIMMs, or those needing speeds above 2400 MHz, should look at other modules. Systems limited to non-ECC memory cannot use the error-correction feature.

The deciding spec is unbuffered ECC at DDR4 2400

Verify that your motherboard and CPU support unbuffered ECC UDIMMs before purchase. Registered or fully buffered slots will not accept this module. The 2Rx8 organisation and 1.20V voltage must match the platform's qualified vendor list for stable operation.

特長

  • 16 GB capacity handles heavier server workloads
  • DDR4 2400 speed with CL17 latency for responsive data access
  • ECC unbuffered design detects and corrects memory errors
  • 20 V standard voltage keeps power draw low
  • 288-pin DIMM form factor fits compatible HP 934798-001 slots

仕様

BrandA-Tech
SeriesCompatible Replacement for HP
Model934798-001
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Features934798-001

この商品に関する質問

Will the 288-pin DDR4 DIMM fit my server's standard memory slots?

The module uses the 288-pin DDR4 DIMM form factor, which matches standard unbuffered DDR4 slots in compatible servers and workstations.

Do I need to configure anything in the BIOS after inserting the 2Rx8 ECC module?

Install the DIMM with the system powered off; most platforms detect the 2Rx8 ECC configuration automatically, but you should verify the memory appears at 2400 MHz in the BIOS.

How can I tell if this 16 GB module is failing over time?

ECC will log correctable errors in the system event log; rising correctable-error counts or uncorrectable errors indicate the module should be replaced.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。