暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 2400 ECC UDIMM 2Rx8 Server Memory

SKU CH-D690-K40YR

16 GB DDR4 2400 ECC unbuffered DIMM with 2Rx8 organisation for server and workstation upgrades

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 16 GB DDR4 2400 ECC UDIMM for server workloads
  • CL17 latency at 1.2 V for efficient operation
  • 2Rx8 dual-rank layout increases memory density
  • 288-pin DIMM fits standard DDR4 server slots
  • Major-brand chips tested for reliable ECC performance

Server ECC UDIMM 16GB

This A-Tech module provides 16GB of DDR4 2400 ECC unbuffered memory for servers and workstations. It operates at 1.20V with CL17 latency and uses a 2Rx8 rank configuration on a 288-pin DIMM. Error-correcting code protects data integrity in critical workloads.

Replaces Samsung M391A2K43BB1-CRC

The module is a compatible equivalent for the Samsung M391A2K43BB1-CRC part number. Upgrading is worth it when your system requires ECC UDIMM DDR4 2400 memory and you need to add capacity or replace a failed stick. Verify your platform supports unbuffered ECC before purchasing.

Suits ECC workstation builds

This memory suits administrators expanding RAM in compatible servers or workstations that use DDR4 2400 ECC UDIMM modules. Builders needing registered DIMMs, higher speeds, or non-ECC consumer memory should look at other products. Systems limited to lower voltages or different form factors cannot use this module.

特長

  • 16 GB DDR4 2400 ECC UDIMM for server workloads
  • CL17 latency at 1.2 V for efficient operation
  • 2Rx8 dual-rank layout increases memory density
  • 288-pin DIMM fits standard DDR4 server slots
  • Major-brand chips tested for reliable ECC performance

仕様

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Will this 288-pin DDR4 UDIMM fit my server motherboard?

The module uses the standard 288-pin DDR4 DIMM form factor and requires a motherboard slot that supports unbuffered ECC DDR4 at 1.2 V.

What is the correct way to seat this ECC UDIMM so it posts on first boot?

Align the notch with the slot key, press down firmly until both side latches click, and ensure the system BIOS is set to the module's 2400 MHz speed and CL17 latency.

When should I plan to replace this 16 GB DDR4 module?

DDR4 memory has no moving parts; replacement is only needed if a memory test reports errors or the server's workload outgrows the 16 GB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。