暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 16GB DDR4 2400MHz ECC Registered RDIMM 2Rx8 Server Memory

SKU CH-K18P-Y4WG8

16GB DDR4 2400MHz ECC registered RDIMM adds reliable server memory capacity

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for validated server compatibility
  • 16 GB DDR4 2400 MHz ECC RDIMM expands capacity
  • Registered dual-rank design improves signal integrity
  • CL17 latency at 1.20 V optimises efficiency
  • 288-pin RDIMM form factor fits standard server slots

16GB DDR4 2400MHz ECC RDIMM

This 16GB DDR4 2400MHz ECC Registered RDIMM is built for servers and workstations that require error-correcting memory. It suits administrators upgrading Supermicro platforms or similar systems needing registered dual-rank modules. The Supermicro certification confirms compatibility with validated hardware configurations.

Thermals noise and power draw

Operating at the standard 1.20V DDR4 voltage, the module runs within normal thermal limits for registered server memory. Passive cooling via system airflow is sufficient; no active cooling or additional power connections are required. The CL17 latency at 2400MHz delivers stable throughput for typical server workloads.

Build fit and system needs

The 288-pin RDIMM form factor fits DDR4 RDIMM slots that support registered ECC memory. Verify your motherboard or server documentation for maximum capacity per slot and total populated ranks. This single module leaves remaining slots available for further expansion without occupying extra physical space.

特長

  • Supermicro certified for validated server compatibility
  • 16 GB DDR4 2400 MHz ECC RDIMM expands capacity
  • Registered dual-rank design improves signal integrity
  • CL17 latency at 1.20 V optimises efficiency
  • 288-pin RDIMM form factor fits standard server slots

仕様

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-HL03-ER24
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR416L-HL03-ER24 (HMA82GR7AFR8N-UH)

この商品に関する質問

How do I install this 288-pin RDIMM and what step is often missed?

Power down the server, open the chassis, align the module notch with the DDR4 slot key, press firmly until both retention clips click, then verify the 2Rx8 configuration is recognised in BIOS before booting the OS.

What maintenance or replacement will this 16 GB DDR4 module need later?

No routine maintenance is required; if a memory test eventually reports correctable ECC errors that exceed the platform threshold, replace the module with an identical 2400 MHz 2Rx8 RDIMM.

What limit appears first when this CL17 1.20 V registered DIMM runs sustained workloads?

The DDR4 2400 MHz bandwidth ceiling and CL17 latency bound throughput before the 1.20 V thermal envelope becomes a constraint.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。