OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
A-Tech
16GB DDR4 desktop DIMM running at 3200 MHz with CL22 latency and 1.2V operation
This module adds 16 GB of DDR4 3200 memory to a desktop system. It uses the standard 288-pin DIMM form factor and runs at 1.20 V. The kit suits anyone who needs more capacity for multitasking or heavier workloads.
The key specification is CAS latency 22 at the rated 3200 MHz speed. This timing determines how quickly the module responds to read requests and whether it matches the motherboard’s supported profile. Verify that the board accepts CL22 at this frequency before ordering.
Align the notch with the slot key, press down until the retention clips click, and the module is seated. The most common issue is inserting the stick backwards or not fully engaging both clips, which prevents the system from posting.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
The module is tested at 3200 MHz; the system BIOS will apply the rated frequency if the motherboard supports DDR4 3200 and the CPU memory controller allows it
Yes, CL22 at 1.2 V matches the baseline DDR4 3200 JEDEC timing, so the stick will boot without manual voltage or timing changes
It uses the standard 288-pin DDR4 DIMM form factor, which fits any desktop board with DDR4 memory slots
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?