OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
A-Tech
16 GB DDR4 3200 ECC registered DIMM with CL22 latency for compatible Samsung server modules
This 16GB DDR4 3200 module is built for servers and workstations that require ECC registered DIMMs. It replaces Samsung M393A2K43DB2-CWE, DB3-CWE and EB3-CWE parts with a direct equivalent.
Operating at the standard 1.20V DDR4 voltage, the module draws minimal power and generates low heat inside a chassis. Registered buffering reduces electrical load on the memory controller during sustained workloads.
Each unit is tested to meet PC4-25600 speed and CL22 latency specifications before shipping. The 2Rx8 organisation and 288-pin form factor match the original Samsung modules for drop-in installation.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Align the notch on the module with the key in the server DIMM slot, press down firmly until both side clips click shut, then verify in BIOS that ECC and registered mode are detected at 3200 MHz CL22.
No routine maintenance is required; if a correctable error count rises or the module fails POST, replace the individual 2Rx8 stick — matched kits are not mandatory for single-slot upgrades.
The registered buffer and CL22 latency set the throughput ceiling; sustained write-heavy loads will hit the command-rate limit before the 1.20V thermal envelope becomes a factor.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?