暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 16GB DDR4 3200 ECC RDIMM 2Rx8 HMAG78EXNRA

SKU CH-VN1T-FXZDC

A 16 GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2 V operation for server and workstation upgrades

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR4 3200 MHz ECC RDIMM for server workloads
  • CL22 latency at 1.20 V for stable operation
  • 2Rx8 dual-rank organisation increases memory density
  • Registered design reduces electrical load on the memory bus
  • 288-pin DIMM form factor fits standard DDR4 server slots

16GB DDR4 3200 ECC RDIMM for servers

This 16GB DDR4 3200 ECC RDIMM module is built for server and workstation systems that require registered memory with error correction. The 2Rx8 organisation and CL22 latency at 1.20V match the Hynix HMAG78EXNRA specification. It is a direct replacement part for that model.

Upgrade from non-ECC or slower DDR4

The module replaces non-ECC UDIMMs or slower DDR4 RDIMMs in platforms that support registered ECC memory. The jump is worth it when your workload demands data integrity and the motherboard accepts 288-pin RDIMMs at 3200 MT/s. Systems limited to UDIMM slots or lower speeds cannot use this module.

Check motherboard RDIMM support and slot count

Verify that your motherboard or server chassis lists DDR4 3200 RDIMM support and has an available 288-pin DIMM slot. Confirm the maximum capacity per slot and the total number of slots populated, as some platforms restrict rank count or total memory. The 262-pin form factor noted in the supplier data refers to SO-DIMM; this product is a 288-pin RDIMM.

特長

  • 16 GB DDR4 3200 MHz ECC RDIMM for server workloads
  • CL22 latency at 1.20 V for stable operation
  • 2Rx8 dual-rank organisation increases memory density
  • Registered design reduces electrical load on the memory bus
  • 288-pin DIMM form factor fits standard DDR4 server slots

仕様

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMAG78EXNRA
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesHMAG78EXNRA

この商品に関する質問

Will this 288-pin DDR4 3200 ECC RDIMM fit my server's DIMM slots?

The module uses the standard 288-pin DDR4 DIMM form factor and requires a slot that accepts registered ECC memory at 1.2 V.

What is the correct way to seat this 16 GB 2Rx8 RDIMM and what step is often missed?

Align the notch with the key, press firmly until both retention clips click, and verify the system recognises the full 16 GB at 3200 MHz.

How can I tell when this ECC RDIMM should be replaced?

Replace the module if the system logs corrected ECC errors that increase over time, or if memory diagnostics report uncorrectable failures.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。