暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR5 RDIMM module with gold edge connectors and black memory chips, 288-pin form factor

A-Tech

A-Tech 16GB DDR5 4800 ECC RDIMM 1Rx8 288-pin server RAM

SKU CH-VWYG-NN6TT

16 GB DDR5 4800 ECC registered server memory with CL40 latency and 1.1 V operation

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR5 capacity handles demanding server workloads
  • 4800 MHz DDR5 speed delivers high data throughput
  • ECC RDIMM design corrects errors for data integrity
  • Registered signal buffering improves system stability
  • 1 V standard voltage ensures efficient power use

16GB DDR5 4800 ECC RDIMM

This 16GB registered DDR5 module runs at 4800MHz with CL40 latency and 1.10V operation. It targets server and workstation administrators who need error-correcting memory for data-integrity workloads. The single-rank 1Rx8 organisation keeps electrical loading low on populated channels. Buyers who need non-ECC or unbuffered DIMMs for consumer platforms should look elsewhere.

Sustained-load behaviour

Registered buffering and on-die ECC maintain signal integrity during continuous read-write cycles typical of database or virtualisation tasks. The 4800MHz data rate delivers consistent throughput without the voltage headroom required for overclocked operation. Systems that demand higher frequencies or lower latencies than CL40 will not be satisfied by this specification.

Build and connectors

The 288-pin DIMM fits standard DDR5 server slots and uses a major-brand chipset for reliable yields. Registered signalling reduces the electrical load on the memory controller, allowing larger populations per channel. Installers must confirm the platform supports DDR5 RDIMM topology; the module will not function in systems limited to UDIMM or earlier DDR generations.

特長

  • 16 GB DDR5 capacity handles demanding server workloads
  • 4800 MHz DDR5 speed delivers high data throughput
  • ECC RDIMM design corrects errors for data integrity
  • Registered signal buffering improves system stability
  • 1 V standard voltage ensures efficient power use

仕様

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMCG78MEBRA115N, HMCG78MEBRA174N, HMCG78MEBRX, HMCG78AEBRA, HMCG78AEBRA107N
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8 (EC8)
ChipsetMajor Brand Chipset
FeaturesHMCG78MEBRA115N, HMCG78MEBRA174N, HMCG78MEBRX, HMCG78AEBRA, HMCG78AEBRA107N

この商品に関する質問

How much heat does the 1.10 V DDR5 4800 RDIMM produce when the server runs continuously?

Operating at the standard DDR5 voltage of 1.10 V, the module draws less power than earlier generations, so sustained loads generate modest heat that typical server airflow handles without extra cooling.

What motherboard slot and CPU memory controller are required for this 288-pin RDIMM to function?

You need a DDR5-capable server or workstation board with a 288-pin RDIMM slot and a processor that supports registered ECC memory at 4800 MT/s; consumer desktop platforms will not accept this module.

Can this CL40 1Rx8 registered ECC module share a channel with other registered ECC DIMMs of different capacity or rank?

Yes, registered ECC DIMMs can be mixed on the same channel if the platform supports mixed-capacity populations, though the memory controller will run all modules at the lowest common speed and timing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。