暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR5 4800 ECC UDIMM 1Rx8 Server Memory

SKU CH-2NA6-TZNG8

16 GB DDR5 4800 ECC unbuffered UDIMM with CL40 latency for server upgrades

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 16GB DDR5 capacity handles demanding server workloads
  • ECC unbuffered design protects data integrity in critical systems
  • 4800MHz speed with CL40 latency delivers responsive performance
  • 10V standard voltage ensures efficient power consumption
  • 288-pin DIMM form factor fits compatible DDR5 server slots

A-Tech 16GB DDR5 4800 ECC UDIMM

This A-Tech module is a 16GB DDR5 4800 ECC unbuffered DIMM built as a compatible replacement for the Micron MTC10C1084S1EC48BA1. It targets server and workstation operators who need dependable memory upgrades for supported platforms. The unit ships new and carries the supplier’s lifetime warranty.

ECC unbuffered DDR5 4800 single rank

The single specification that decides fit is the ECC unbuffered DDR5 4800 configuration with a 1Rx8 organisation. Your motherboard must explicitly support ECC unbuffered DDR5 at this speed and rank layout; registered or non-ECC boards will not accept it.

Straightforward DIMM install

Installation follows the standard 288-pin DIMM procedure: power down, open the chassis, align the notch, and press until the latches click. The usual problem is purchasing for a system that requires registered DIMMs or non-ECC memory, so verify the platform’s qualified vendor list before ordering.

特長

  • 16GB DDR5 capacity handles demanding server workloads
  • ECC unbuffered design protects data integrity in critical systems
  • 4800MHz speed with CL40 latency delivers responsive performance
  • 10V standard voltage ensures efficient power consumption
  • 288-pin DIMM form factor fits compatible DDR5 server slots

仕様

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTC10C1084S1EC48BA1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8 (EC4)
ChipsetMicron Chipset
FeaturesMTC10C1084S1EC48BA1

この商品に関する質問

What does the 4800 speed rating mean once this DDR5 module is installed in a server?

The module runs at DDR5 4800 (PC5-38400) with CAS latency 40, delivering its rated data rate when the platform enables that speed.

How does the DDR5 4800 (PC5-38400) interface cap real-world performance?

DDR5 4800 sets the maximum data rate at 4800 MT/s; actual throughput depends on the memory controller and system configuration.

What physical slot and clearance does this 288-pin UDIMM need to fit?

It requires a standard 288-pin DDR5 UDIMM slot and fits the 262-pin form factor used in compatible server and workstation boards.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。