暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green bare DDR5 DIMM 288 pin 16GB CL40 1.10V

A-Tech

A-Tech 16GB DDR5-5600 CL40 1.10V Hynix HMCG78AGBUA Desktop RAM

SKU CH-PYJ3-WSAHB

A 16 GB DDR5 desktop DIMM running at 5600 MHz with CL40 latency and 1.10 V operation

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • Tested Frequency5600
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo
  • 16 GB DDR5 capacity lets you run more apps at once
  • 5600 MT/s rated speed moves data quickly through the system
  • CL40 CAS latency keeps response times tight
  • 10 V standard voltage runs efficiently without extra power
  • 288-pin DIMM form factor fits standard desktop memory slots

Capacity and Purpose

This 16 GB DDR5 module is an unbuffered DIMM built to replace the Hynix HMCG78AGBUA part. It targets desktop owners who need a straightforward memory upgrade for everyday workloads and multitasking.

Sustained-Load Behaviour

Running at the standard 1.10 V, the stick maintains its rated 5600 MT/s without a heat spreader, so thermals depend on case airflow during long sessions. The CL40 timing stays consistent as the module settles into extended use.

Interface Practical Limits

The 288-pin DDR5 interface tops out at the PC5-44800 bandwidth ceiling, so this module cannot exceed the 5600 MT/s data rate. Any higher speed would require a different memory standard or an overclockable kit not supplied here.

特長

  • 16 GB DDR5 capacity lets you run more apps at once
  • 5600 MT/s rated speed moves data quickly through the system
  • CL40 CAS latency keeps response times tight
  • 10 V standard voltage runs efficiently without extra power
  • 288-pin DIMM form factor fits standard desktop memory slots

仕様

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMCG78AGBUA
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
Tested Frequency5600
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesHMCG78AGBUA
Recommend UseCompatible Replacement for Hynix HMCG78AGBUA

この商品に関する質問

How hot and loud does the 1.10V DDR5-5600 module run under continuous load?

The stick runs at the standard 1.10 V DDR5 voltage with no heat spreader, so it stays cool and silent; any warmth or fan noise comes from the motherboard and case airflow around the DIMM slot.

What must my motherboard already provide for this 288-pin DDR5 DIMM to work?

A desktop board with a DDR5 288-pin slot, support for 5600 MT/s operation, and a BIOS that can train non-ECC unbuffered memory at 1.10 V.

Will this CL40 5600 MHz stick downclock cleanly beside my older DDR5-4800 modules?

Yes — the JEDEC DDR5 spec requires backward compatibility, so the module will automatically run at the lowest common speed and latency present in the system.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。