暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 32GB (2x16GB) DDR4 2400 ECC RDIMM 1Rx4 CL17 1.20V server RAM

SKU CH-7JW2-VAPQ4

32 GB dual-channel DDR4-2400 ECC registered kit with two 16 GB single-rank modules at CL17 and 1.20 V

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (2 x 16GB)

  • Registered ECC protects data integrity for server workloads
  • 32 GB dual-channel kit uses two 16 GB modules
  • DDR4 2400 MHz CL17 runs at standard 1.20 V
  • Single-rank 1Rx4 layout fits registered DIMM slots
  • 288-pin RDIMM form factor for compatible servers and workstations

32GB DDR4 ECC RDIMM kit

This A-Tech kit delivers 32GB of DDR4 2400 registered ECC memory in two 16GB modules. It is built for servers and workstations that require error-correcting registered DIMMs. The single-rank x4 organisation and CL17 latency support stable operation under sustained workloads. Desktop and laptop systems cannot use these modules.

Registered DIMM integration

The 288-pin RDIMM form factor fits DDR4 server platforms that support registered memory with ECC. Each module runs at the standard 1.20V DDR4 voltage and uses major-brand chips validated through quality-assurance testing. A dual-channel kit populates two slots and leaves remaining channels open for further expansion. Verify your system manual for supported speeds, maximum capacity and channel population rules before installation.

Upgrade from lower-capacity or non-ECC DDR4

Replacing smaller RDIMM modules or non-ECC memory with this kit adds capacity and data-integrity protection for critical workloads. The jump is worthwhile when your current configuration limits virtual-machine density, database caching or compile throughput. Systems already at the platform’s maximum supported memory or those requiring faster speeds will not benefit from this specific 2400 MHz kit.

特長

  • Registered ECC protects data integrity for server workloads
  • 32 GB dual-channel kit uses two 16 GB modules
  • DDR4 2400 MHz CL17 runs at standard 1.20 V
  • Single-rank 1Rx4 layout fits registered DIMM slots
  • 288-pin RDIMM form factor for compatible servers and workstations

仕様

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 16GB 1Rx4 PC4-2400T-R
Capacity32GB (2 x 16GB)
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the CL17 latency limit throughput on a 2400 MHz server workload?

The CL17 timing is the rated latency for DDR4 2400 operation; sustained throughput will follow the 19200 MB/s peak bandwidth of the PC4-19200 specification.

How much heat does a 1.20 V registered DIMM produce under continuous load?

At 1.20 V the modules run at standard DDR4 voltage; registered buffering adds minimal power draw, so thermal output stays within normal server DIMM limits.

What motherboard feature must my system already have to use this ECC RDIMM kit?

Your server or workstation must support DDR4 registered ECC memory with a 288-pin DIMM slot; desktop or laptop platforms will not accept these modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。