暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 RDIMM sticks with black chips and gold contacts

A-Tech

A-Tech 32GB (2x16GB) DDR4 2933 ECC RDIMM 2Rx8 CL21 1.2V Server RAM

SKU CH-JNEX-NGFQ5

A 32 GB dual-channel kit of two 16 GB DDR4 2933 ECC registered DIMMs running at CL21 and 1.2 V

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (2 x 16GB)

  • 32 GB dual-channel kit expands server memory capacity for heavier workloads
  • DDR4 2933 MHz speed accelerates data throughput in registered DIMM slots
  • ECC registered design detects and corrects single-bit errors for data integrity
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 2 V standard voltage maintains efficient power draw in 288-pin DDR4 servers

Server memory kit for registered DDR4 platforms

This 32 GB kit contains two 16 GB DDR4 2933 ECC RDIMM modules built for servers and workstations that require registered memory. The dual-rank x8 organisation and CL21 latency suit multi-channel configurations in enterprise environments. Desktop and laptop systems cannot use these modules.

Thermals noise and power draw in normal use

Operating at the standard DDR4 voltage of 1.2 V, the modules draw minimal power and generate low heat inside a chassis with adequate airflow. Registered buffering adds negligible latency while keeping signal integrity stable under sustained workloads. No active cooling is required beyond normal server fan profiles.

What the bundled accessories

The kit includes only the two memory modules; no additional accessories, heatsinks or software utilities are supplied. Compatibility depends entirely on the target platform supporting DDR4 ECC RDIMM at 2933 MHz with 2Rx8 ranking. Verification against the system manual ensures correct seating and channel population.

特長

  • 32 GB dual-channel kit expands server memory capacity for heavier workloads
  • DDR4 2933 MHz speed accelerates data throughput in registered DIMM slots
  • ECC registered design detects and corrects single-bit errors for data integrity
  • 2Rx8 dual-rank organisation increases memory density per channel
  • 2 V standard voltage maintains efficient power draw in 288-pin DDR4 servers

仕様

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 16GB 2Rx8 PC4-2933Y-R
Capacity32GB (2 x 16GB)
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install these 288-pin DDR4 RDIMMs in the correct memory channels?

Power down the server, open the chassis, and seat each 16 GB module firmly into the paired slots indicated by your system manual until the retention clips click; the registered design requires exact slot alignment for dual-channel operation.

Will the ECC RDIMM chips or registers need replacement after extended server use?

The Major Brand Chipset modules are validated for continuous operation; no user-serviceable components exist on the DIMMs, so no periodic chip or register replacement is expected.

At what point does the CL21 latency at 2933 MHz become the bottleneck during sustained workloads?

Under prolonged heavy loads the fixed CL21 timing at 2933 MHz limits throughput before thermal or voltage thresholds are reached, making latency the first constraint.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。