暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR4 ECC UDIMM sticks, 288-pin, silver heatsinks

A-Tech

A-Tech 32GB (4x8GB) DDR4 2400 MHz ECC UDIMM CL17 2Rx8 1.2V 288-Pin Server RAM

SKU CH-3RYQ-1GYFE

A 32 GB DDR4 ECC UDIMM kit running at 2400 MHz with CL17 latency and 1.2 V for servers and workstations

  • CAS LatencyCL17
  • Rank2Rx8
  • ECC protection guards data integrity in servers
  • CL17 latency at 2400 MHz DDR4 speed
  • Dual-rank 2Rx8 layout increases memory density
  • Four 8 GB modules provide 32 GB total capacity
  • Standard 1.2 V DDR4 voltage reduces power draw

Server ECC memory kit

This 32 GB kit contains four 8 GB DDR4 ECC UDIMM modules rated at 2400 MHz with CL17 latency. Each module is a 2Rx8 dual-rank DIMM operating at the standard 1.2 V. The kit is designed for servers and workstations that require error-correcting unbuffered memory.

288-pin DDR4 platform fit

The modules use the 288-pin DDR4 DIMM form factor and are compatible only with systems that support DDR4 ECC unbuffered memory. They are not compatible with standard desktop or laptop computers. Builders must verify the motherboard or server manual for supported speeds, ranks and population rules before installation.

Standard voltage thermals

At 1.2 V the modules run at the standard DDR4 voltage, which helps keep power draw and heat output within normal limits for ECC UDIMM operation. No extra cooling beyond typical server airflow is required. The dual-rank organisation provides density without increasing voltage or thermal load.

特長

  • ECC protection guards data integrity in servers
  • CL17 latency at 2400 MHz DDR4 speed
  • Dual-rank 2Rx8 layout increases memory density
  • Four 8 GB modules provide 32 GB total capacity
  • Standard 1.2 V DDR4 voltage reduces power draw

仕様

CAS LatencyCL17
Rank2Rx8

この商品に関する質問

How does the CL17 latency affect sustained throughput?

CL17 sets the minimum cycle delay for each column access; lower latency would reduce wait states during long compute runs but the modules operate at the rated 2400 MHz speed.

What thermal or power behaviour should be expected when all four modules run continuously?

Each module runs at the standard 1.2 V DDR4 voltage, so total power draw scales with four dual-rank DIMMs; typical server airflow handles the resulting heat without extra cooling.

Which motherboard feature must already be present for this kit to function?

The board must provide DDR4 ECC UDIMM slots with 288-pin connectors and support dual-rank x8 modules at 2400 MHz.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。