暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 32GB DDR3 1333MHz PC3-10600 ECC RDIMM 4Rx4 1.5V 240-Pin Server Memory

SKU CH-PXP6-QNJ72

32GB DDR3 1333MHz ECC registered DIMM with 4Rx4 organisation for server upgrades

  • Capacity32GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32GB capacity lets servers handle larger workloads
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • ECC registered design corrects data errors for reliability
  • 4Rx4 organisation maximises density on a single 240-pin module
  • 5V standard voltage ensures compatibility with DDR3 platforms

Capacity and form factor

This is a single 32GB DDR3 registered DIMM built for servers and workstations that require ECC memory. It uses a 240-pin layout and operates at the standard 1.5V voltage for DDR3 modules.

Sustained-load behaviour

The module runs at 1333MHz with CL9 latency and a 4Rx4 organisation, providing error-correcting code protection during continuous workloads. Registered buffering helps maintain signal integrity when the system is fully populated under heavy demand.

Compatibility checks

Verify that your motherboard supports DDR3 registered ECC DIMMs and can address a 4Rx4 configuration at this density. Confirm the memory slot count and maximum capacity per channel before ordering.

特長

  • 32GB capacity lets servers handle larger workloads
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • ECC registered design corrects data errors for reliability
  • 4Rx4 organisation maximises density on a single 240-pin module
  • 5V standard voltage ensures compatibility with DDR3 platforms

仕様

BrandA-Tech
Capacity32GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

How much power does the 1.5 V DDR3 module draw when the server runs continuously?

The module operates at the standard DDR3 voltage of 1.5 V, so its power draw is determined by the platform's memory controller and workload rather than a fixed wattage figure.

What motherboard slot and chipset support are required for this 240-pin registered ECC DIMM?

You need a server or workstation board with DDR3 240-pin RDIMM slots that accept 4Rx4 registered ECC modules at 1333 MHz.

Can this 4Rx4 registered stick be mixed with older 2Rx4 or 1Rx8 DDR3 DIMMs in the same channel?

Mixing ranks is not recommended; the memory controller must support 4Rx4 registered ECC, and population rules vary by platform.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。