OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
A-Tech
A 32GB DDR4 2666MHz ECC registered DIMM with CL19 latency and 1.20V operation for server upgrades
This A-Tech module provides 32GB of DDR4 2666MHz registered ECC memory in a single 288-pin DIMM. It runs at 1.20V with CL19 latency and uses a 2Rx4 organisation. The stick is built as a direct replacement for the Crucial CT32G4RFD4266 part number.
This module fits systems that require registered DDR4 ECC DIMMs at the 2666MHz speed grade. It is not suitable for desktop boards that accept only unbuffered non-ECC memory, nor for platforms limited to lower speeds or different voltages.
Check the motherboard or system manual for the maximum supported capacity per slot and the qualified voltage of 1.20V. Confirm the memory controller accepts 2Rx4 registered modules before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module uses a 288-pin DDR4 DIMM interface and requires a server or workstation motherboard that supports registered ECC memory at 1.20V.
Mixing ranks is possible only if the platform's memory controller and BIOS allow it; populate identical modules per channel for best stability.
Enter the system BIOS or UEFI and verify the memory speed shows 2666 MT/s and ECC status reports enabled for the new DIMM.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?