暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with black memory chips, gold edge connector, no heat spreader

A-Tech

A-Tech 32GB DDR4 2933MHz CL21 Desktop RAM

SKU CH-W6R0-0PQMN

A 32GB DDR4 2933MHz CL21 desktop DIMM built as a compatible replacement for HP L89423-001

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • Tested Frequency2933
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo
  • 32 GB capacity handles heavier workloads and multitasking
  • DDR4 2933 MHz speed moves data faster for responsive applications
  • CL21 latency with 1.20 V operation balances timing and power use
  • 288-pin DIMM form factor fits standard desktop memory slots
  • Tested as compatible replacement for HP L89423-001

Product Identity

This A-Tech module is a 32GB DDR4 2933MHz desktop DIMM built as a direct replacement for HP part L89423-001. It runs at 1.20V with CL21 latency and uses unbuffered non-ECC chips on a 288-pin PCB. The single stick delivers 32GB of capacity for mainstream desktop workloads.

Ideal Use Case

The kit suits owners of compatible HP desktops needing a straightforward 32GB upgrade without ECC or registered buffering. Systems that require registered memory, ECC error correction, or speeds beyond 2933MHz should consider different modules. Verify your motherboard accepts 2Rx8 unbuffered DDR4 before ordering.

Deciding Specification

The 2933MHz CL21 rating at 1.20V is the single figure that determines fit. If your platform specifies DDR4-2933 non-ECC UDIMM at this voltage the module will operate at its rated speed. A different speed grade or voltage requirement means this part will not match the system profile.

特長

  • 32 GB capacity handles heavier workloads and multitasking
  • DDR4 2933 MHz speed moves data faster for responsive applications
  • CL21 latency with 1.20 V operation balances timing and power use
  • 288-pin DIMM form factor fits standard desktop memory slots
  • Tested as compatible replacement for HP L89423-001

仕様

BrandA-Tech
SeriesCompatible Replacement for HP
ModelL89423-001
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
Tested Frequency2933
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesL89423-001
Recommend UseCompatible Replacement for HP L89423-001

この商品に関する質問

Will this 32GB module work in a system that specifies the HP L89423-001 part number?

Yes, it is built as a direct replacement for that HP part number and matches the DDR4 2933MHz PC4-23400 specification.

Does the module need a heat spreader to run at 2933MHz?

No, it operates at the standard 1.2V DDR4 voltage without a heat spreader and has been tested at 2933MHz.

Can I install this in a motherboard that only has 262-pin SO-DIMM slots?

No, this is a 288-pin DIMM for desktop boards; it will not fit 262-pin laptop slots.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。