暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 RDIMM with black chips and gold contacts

A-Tech

A-Tech 32GB DDR4 2933MHz ECC RDIMM 1Rx4 Server Memory

SKU CH-JWEW-STK3P

32 GB DDR4 2933 MHz ECC registered DIMM with 1Rx4 organisation and CL21 latency

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity supports heavy server workloads
  • DDR4 2933 MHz speed delivers fast data throughput
  • ECC RDIMM design detects and corrects memory errors
  • Registered 1Rx4 architecture reduces electrical load on the bus
  • 2 V operation matches standard DDR4 voltage requirement

32GB DDR4 2933MHz ECC RDIMM

This 32GB DDR4 2933MHz ECC RDIMM module provides registered, error-correcting memory for server and workstation platforms. It operates at PC4-23400 speed with a CL21 latency and 1.20V voltage. The single-rank 1Rx4 organisation uses Micron chipset components on a 288-pin DIMM form factor. It serves administrators who need validated capacity expansion for compatible systems.

Sustained load behaviour

Registered buffering reduces electrical load on the memory controller during continuous operation, helping maintain signal integrity across all 72 bits including ECC. The 1.20V standard voltage supports stable throughput without elevated power draw during extended workloads. Quality assurance testing verifies reliable performance under prolonged utilisation typical of server environments.

DDR4 interface limits

The DDR4 2933MHz interface delivers 23400 MB/s theoretical bandwidth per module, constraining maximum throughput to this ceiling regardless of processor capability. Single-rank 1Rx4 density limits total capacity per channel compared to dual-rank alternatives. Compatibility depends on platform support for registered ECC DIMMs at this specific speed and voltage.

特長

  • 32 GB capacity supports heavy server workloads
  • DDR4 2933 MHz speed delivers fast data throughput
  • ECC RDIMM design detects and corrects memory errors
  • Registered 1Rx4 architecture reduces electrical load on the bus
  • 2 V operation matches standard DDR4 voltage requirement

仕様

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA18ADF4G72PZ-2G9B1, MTA18ASF4G72PZ-2G9E1
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMicron Chipset
FeaturesMTA18ADF4G72PZ-2G9B1, MTA18ASF4G72PZ-2G9E1

この商品に関する質問

How much power does this 1.20 V DDR4 2933 MHz ECC RDIMM draw under continuous server load?

The module operates at the standard DDR4 voltage of 1.20 V. Registered ECC DIMMs typically consume slightly more power than unbuffered modules due to the register, but exact draw depends on your platform and workload.

What must my motherboard provide to run this 288-pin DDR4 2933 MHz registered ECC module?

A DDR4 RDIMM slot with ECC support, 1.2 V operation and a memory controller qualified for 2933 MHz registered DIMMs.

Will this CL21 1Rx4 registered DIMM work alongside older DDR4 modules in the same system?

Mixing ranks, speeds or latencies is possible but not guaranteed; the system will run all modules at the lowest common speed and timing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。