EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
32 GB DDR5 4800 CL40 desktop DIMM, Supermicro certified with Micron chips at 1.1 V
This 32GB DDR5 module runs at 4800MHz with CL40 latency and 1.10V operation. It uses a 2Rx8 Micron chipset on a 288-pin unbuffered non-ECC PCB. The stick carries Supermicro certification for validated compatibility.
Ideal for upgrading compatible Supermicro workstations or servers that require certified DDR5 4800 memory. Not intended for platforms that demand registered ECC modules or speeds beyond the tested 4800MHz frequency.
Align the notch with the motherboard slot and press firmly until the retention clips engage. Common issues include mixing this unbuffered DIMM with registered memory or skipping the BIOS update required for full 4800MHz operation.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR532MD-UN48 |
| Capacity | 32GB |
| Speed | DDR5 4800 (PC5 38400) |
| Tested Frequency | 4800 |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Micron Chipset |
| Heat Spreader | No |
| Features | Supermicro Certified MEM-DR532MD-UN48 (MTC16C2085S1UC48BA1) |
| Recommend Use | Compatible Supermicro Systems |
A motherboard with a 288-pin DDR5 DIMM slot is required for this module to fit and function.
The module will downclock to match the highest DDR5 speed the motherboard and CPU officially support, so it will run at that lower speed instead of 4800 MHz.
Check the memory timing readout in the BIOS or a system-information tool; it should show CAS latency 40 when the kit is running at its rated 4800 MHz.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?