暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 204-Pin SODIMM Laptop Memory

SKU CH-5VQ3-KN7Q1

4GB DDR3 1333MHz SODIMM laptop memory module compatible with HP part numbers 593896-001 and 593994-001

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity adds multitasking headroom for everyday workloads
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • 204-pin SO-DIMM form factor fits compatible laptop slots
  • CL9 latency at 1.5V delivers standard DDR3 timing
  • Tested compatible replacement for HP part numbers 593896-001 and 593994-001

Compatible HP Laptop Upgrade

This A-Tech module is a 4 GB DDR3 SO-DIMM built to replace HP part numbers AT913UT#ABA, 593896-001 and 593994-001. It targets owners of compatible HP laptops, notebooks or all-in-one systems who need a straightforward memory replacement. The stick is unbuffered, non-ECC and runs at the standard 1.50 V DDR3 voltage. Buyers who need higher capacities or newer memory generations should look elsewhere.

Capacity And Speed Limits

The single 4 GB rank operates at 1333 MHz (PC3-10600) with CL9 latency, giving a modest boost for everyday multitasking and office workloads. It will handle light productivity and web browsing comfortably but runs out of headroom with memory-hungry applications, large datasets or modern gaming. Systems requiring more than 4 GB per slot or faster transfer rates cannot use this module.

Thermals And Power Profile

With no heat spreader and a low 1.50 V operating voltage, the module draws minimal power and produces little heat during normal use. Passive cooling inside a typical laptop chassis is sufficient; there is no fan noise because the stick has none. The unbuffered design keeps electrical load on the memory controller light, contributing to stable operation in supported HP platforms.

特長

  • 4GB capacity adds multitasking headroom for everyday workloads
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • 204-pin SO-DIMM form factor fits compatible laptop slots
  • CL9 latency at 1.5V delivers standard DDR3 timing
  • Tested compatible replacement for HP part numbers 593896-001 and 593994-001

仕様

BrandA-Tech
SeriesCompatible Replacement for HP
ModelAT913UT#ABA, 593896-001, 593994-001
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesAT913UT#ABA, 593896-001, 593994-001
Recommend UseCompatible Replacement for HP AT913UT#ABA, 593896-001, 593994-001

この商品に関する質問

Will this DDR3 1333MHz SODIMM run at the correct speed when paired with an existing DDR3 module in my laptop?

The module operates at DDR3 1333MHz (PC3-10600) with CL9 latency and 1.5V voltage. When mixed with slower DDR3 memory, the system will typically run all modules at the lowest common speed and timing.

How can I confirm the 4GB module is detected at 1333MHz after installation?

Check the system BIOS or use a tool like CPU-Z to verify the memory shows 4GB capacity, DDR3 type, 1333MHz frequency, and CL9 timings at 1.5V.

Does the single 204-pin SODIMM come with any installation tools or additional cables?

The box contains only the 4GB DDR3 1333MHz 204-pin SODIMM module. No tools, cables, or adapters are included; installation requires only a compatible laptop slot and a small screwdriver.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。