暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, gold edge connector, no heat spreader

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 Desktop Memory

SKU CH-XTF3-ZZSGC

4GB DDR3 1333MHz PC3-10600 desktop DIMM module, CL9 latency at 1.5V, unbuffered non-ECC design validated as a direct replacement for HP part 497158-C01

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity lets you multitask smoothly
  • DDR3 1333MHz speed handles everyday workloads
  • 240-pin DIMM fits standard desktop slots
  • 5V standard voltage keeps power draw low
  • Tested replacement for HP 497158-C01 ensures compatibility

HP 497158-C01 Compatible DDR3 Upgrade

This 4GB DDR3 1333MHz PC3-10600 DIMM is an A-Tech replacement module built for HP systems using part number 497158-C01. It runs at 1.5V with CL9 latency and uses an unbuffered non-ECC design. The 240-pin form factor fits standard desktop DDR3 slots for straightforward installation.

Sustained Load Behaviour

Under continuous workloads the module maintains its rated 1333MHz frequency and 1.50V operating voltage without throttling. Unbuffered operation keeps latency predictable during extended multitasking or background tasks. Quality assurance testing validates reliable performance over long sessions rather than brief bursts.

DDR3 Interface Limits

The DDR3 standard at 1333MHz caps theoretical bandwidth at the PC3-10600 level regardless of module brand. CL9 timing represents the minimum cycle delay the interface allows at this speed. A single 4GB rank cannot exceed the density ceiling defined by the DDR3 JEDEC specification for unbuffered DIMMs.

特長

  • 4GB capacity lets you multitask smoothly
  • DDR3 1333MHz speed handles everyday workloads
  • 240-pin DIMM fits standard desktop slots
  • 5V standard voltage keeps power draw low
  • Tested replacement for HP 497158-C01 ensures compatibility

仕様

BrandA-Tech
SeriesCompatible Replacement for HP
Model497158-C01
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Features497158-C01
Recommend UseCompatible Replacement for HP 497158-C01

この商品に関する質問

How much heat does the 1.50V DDR3 1333 module add when running all day?

At standard 1.50 V DDR3 voltage the module produces only modest warmth; a normal case airflow is enough to keep temperatures in check during continuous use.

What must my desktop already have to accept this 240-pin DIMM?

A free DDR3 DIMM slot on a motherboard that supports 1333 MHz unbuffered non-ECC memory at 1.5 V.

Will this CL9 4 GB stick work alongside my older PC3-10600 modules?

Yes, it matches the 1333 MHz speed and 1.5 V voltage, so it will run at the same timings as existing PC3-10600 DIMMs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。