暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge connectors, 240-pin DDR3 registered DIMM

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 ECC RDIMM 1Rx4 server RAM

SKU CH-S9JP-R0MW7

A 4 GB DDR3-1333 ECC registered DIMM with CL9 timing and 1.5 V operation for server upgrades

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory headroom for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC RDIMM registered design corrects errors and stabilises multi-module configs
  • 1Rx4 single-rank layout keeps electrical load low on populated channels
  • 5V standard DDR3 voltage ensures drop-in compatibility with existing DIMM slots

Product identity and purpose

This 4 GB DDR3 1333 MHz registered ECC module is built for servers and workstations that require error-correcting registered memory. It uses a single 1Rx4 rank, runs at the standard 1.5 V DDR3 voltage, and fits 240-pin DIMM slots.

Who should consider this and who should not

It suits administrators replacing or expanding memory in systems qualified for PC3-10600 registered ECC DIMMs. It is not for desktops or laptops that accept only unbuffered non-ECC modules, nor for platforms limited to lower densities or different pin counts.

The specification that decides fit

The registered ECC design with 1Rx4 organisation and DDR3 1333 speed determines compatibility; the motherboard and CPU must support registered error-correcting DDR3 at this data rate.

特長

  • 4GB capacity expands server memory headroom for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC RDIMM registered design corrects errors and stabilises multi-module configs
  • 1Rx4 single-rank layout keeps electrical load low on populated channels
  • 5V standard DDR3 voltage ensures drop-in compatibility with existing DIMM slots

仕様

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

What comes in the box and is anything else needed to install it?

The box contains one 4GB DDR3 1333MHz ECC RDIMM module. No extra parts are required if your server has a free 240-pin DIMM slot and supports registered ECC memory.

Should I choose this 4GB 1Rx4 module or a different capacity for my server?

Choose this 4GB 1Rx4 module when your system needs a single registered ECC DIMM at 1333MHz. Add multiple identical modules to reach the total capacity your workload requires.

What does the PC3-10600 rating mean once the module is installed in a server?

PC3-10600 indicates a DDR3 1333MHz module with a peak data rate of 10600 MT/s, CL9 latency and 1.5V operation, giving your server registered ECC bandwidth at that speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。