BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
4GB DDR3 1600 CL11 desktop DIMM running at 1.5V for AMD and Intel systems
This A-Tech module provides 4GB of DDR3 memory at 1600MHz (PC3-12800) for desktop computers. It uses a standard 240-pin unbuffered non-ECC design and operates at 1.50V. The single-rank 1Rx8 stick is tested for compatibility with AMD and Intel platforms.
This memory suits owners of desktop systems that accept DDR3 1600MHz UDIMMs and need a 4GB capacity boost. It matches the specifications for Crucial CT51264BA160BJ and CT2KIT51264BA160BJ replacements. Systems requiring ECC, registered, or a different DDR generation will not accept this module.
The module runs at CL11 latency with a standard DDR3 voltage of 1.50V. This timing and voltage combination determines whether the stick will operate correctly in your specific motherboard. Verify your system supports these exact parameters before purchasing.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Align the notch on the module with the slot key, press firmly until both side clips click, then verify the system detects the full 4 GB at 1600 MHz in BIOS.
No scheduled maintenance is required; replace only if memory errors appear or a larger capacity is desired.
The DDR3 1600 speed and CL11 latency are the fixed performance ceiling; the module cannot exceed the rated 1600 MHz frequency.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?