暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 UDIMM with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1600 ECC UDIMM 1Rx8 Server RAM

SKU CH-R9C0-2QDZS

4GB DDR3 1600 ECC UDIMM module with 1Rx8 organisation, CL11 latency and 1.50V operation for server and workstation systems

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in server workloads
  • 1600 MHz DDR3 speed handles demanding applications
  • 1Rx8 single-rank layout simplifies memory configuration
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin UDIMM form factor fits standard server slots

A-Tech 4GB DDR3 1600 ECC UDIMM

This 4GB DDR3 1600 module is an ECC unbuffered DIMM built for server and workstation systems that require error-correcting memory. It runs at PC3-12800 speed with CL11 latency at the standard 1.5V. The single-rank 1Rx8 layout uses major-brand chips on a 240-pin PCB. It serves as a direct replacement for several Kingston part numbers.

Suits servers needing ECC unbuffered DDR3

This module fits systems that specifically call for DDR3 ECC UDIMMs at 1600MHz and 1.5V. It is not for platforms that require registered or load-reduced DIMMs, nor for boards that only accept non-ECC memory. Buyers whose hardware demands higher capacities per slot or a different DDR generation should look elsewhere. Verify your system's qualified vendor list before ordering.

The deciding spec is ECC UDIMM at DDR3 1600

The combination of ECC unbuffered operation and DDR3 1600 speed determines whether this part will work. Motherboards wired for registered ECC, non-ECC, or a different DDR generation will not accept it. Check the manual or QVL for PC3-12800 ECC UDIMM support at 1.5V before purchasing.

特長

  • ECC protection guards data integrity in server workloads
  • 1600 MHz DDR3 speed handles demanding applications
  • 1Rx8 single-rank layout simplifies memory configuration
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin UDIMM form factor fits standard server slots

仕様

BrandA-Tech
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Does the 240-pin DDR3 DIMM fit a standard unbuffered ECC UDIMM slot?

Yes, the module uses the standard 240-pin DDR3 DIMM form factor for ECC UDIMM slots in server and workstation boards.

What is the correct orientation when seating the 1Rx8 module?

Align the notch on the module with the key in the slot, press down firmly until both side clips click into place.

Will the 1.5V major-brand chips need active cooling or replacement over time?

The chips run at standard 1.5V DDR3 voltage and are tested for long-term reliability; no active cooling or scheduled replacement is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。