暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 4GB DDR3 1866 ECC UDIMM 2Rx8 Server Memory

SKU CH-CNBB-R2Y4X

4GB DDR3 1866MHz ECC UDIMM server memory with CL13 latency and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in servers
  • 1866 MHz DDR3 speed accelerates workloads
  • 50 V standard voltage keeps power draw low
  • 240-pin UDIMM fits unbuffered server slots
  • 2Rx8 dual-rank layout maximises 4 GB capacity

4 GB DDR3 1866 ECC UDIMM

This A-Tech module is a 4 GB DDR3 1866 ECC UDIMM designed for server and workstation systems. It operates at PC3-14900 speed with a CL13 latency and standard 1.5 V. The single 240-pin DIMM uses a 2Rx8 organisation and major-brand chips for dependable operation.

IT professionals maintaining DDR3 platforms

System administrators upgrading compatible Samsung M391B5273DH0-CMA slots will find a direct replacement here. Builders who require registered DIMMs, higher densities per module, or non-ECC memory for consumer boards should look elsewhere.

ECC UDIMM with 2Rx8 organisation

The module is an unbuffered ECC DIMM built with a dual-rank 2Rx8 layout. This specific rank configuration and error-correcting capability determine whether the memory will initialise correctly in your server or workstation motherboard.

特長

  • ECC protection guards data integrity in servers
  • 1866 MHz DDR3 speed accelerates workloads
  • 50 V standard voltage keeps power draw low
  • 240-pin UDIMM fits unbuffered server slots
  • 2Rx8 dual-rank layout maximises 4 GB capacity

仕様

BrandA-Tech
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

What motherboard slot and voltage does this 240-pin DDR3 ECC UDIMM require?

It fits a standard DDR3 DIMM socket and operates at 1.5 V, the default voltage for DDR3 1866 modules.

Will this 1866 MHz CL13 module run stably alongside slower DDR3 DIMMs already in my server?

The memory controller will set a common speed and the loosest timings across all populated slots, so mixed speeds are supported but the faster module will run at the lower rate.

How can I confirm the module is detected as 4 GB ECC at 1866 MHz after installation?

Check the BIOS memory summary or run a tool such as dmidecode or CPU-Z; it should report 4 GB, ECC enabled, 1866 MT/s and CL13 timings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。