EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
ECC registered DDR3L server module with 4 GB capacity, 1333 MHz speed, 1.35 V low voltage and 240-pin DIMM form factor
This A-Tech module is a 4 GB DDR3L ECC registered DIMM built for server and workstation systems that require error-correcting memory. It operates at 1.35 V low voltage and fits standard 240-pin DDR3 slots.
The single specification that decides fit is the registered ECC RDIMM design with a 1Rx4 organisation; only motherboards that explicitly support registered ECC DDR3L at 1333 MHz can use this module.
The 4 GB capacity suits light virtualization, file serving or legacy application workloads where registered ECC stability is mandatory. It runs out when larger datasets or multiple virtual machines demand more than a single 4 GB rank can provide.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at DDR3L 1333 (PC3L-10600) with CL9 latency, delivering the rated throughput when the platform’s memory controller is set to that frequency.
The DDR3L 1.35 V registered DIMM interface caps the operating voltage at 1.35 V, so the module will only work in slots that support DDR3L low-voltage signalling.
It uses the standard 240-pin DDR3 DIMM form factor with registered (RDIMM) signalling; verify your system requires registered ECC modules before installing.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?