暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3L DIMM with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3L 1333MHz PC3L-10600 ECC RDIMM 1Rx4 1.35V Server Memory

SKU CH-M10T-82KJ9

ECC registered DDR3L module adds 4 GB at 1333 MHz with 1.35 V low-voltage operation for compatible HP servers

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection safeguards data integrity with registered DDR3L error correction
  • Low 1.35V DDR3L voltage reduces server power draw and heat
  • 1333MHz PC3L-10600 speed delivers responsive performance for virtualised workloads
  • 1Rx4 registered DIMM architecture enables stable high-density memory configurations
  • 240-pin DDR3 form factor fits compatible HP ProLiant and workstation platforms

A-Tech 4GB DDR3L ECC RDIMM

This 4GB registered DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 1Rx4 organisation and major-brand chips for server-grade reliability. The stick is built as a direct replacement for numerous HP part numbers including 604500-B21 and 606426-001.

DDR3L 1333 registered DIMM limits

Registered DIMMs require a motherboard that supports registered memory; they will not work in standard desktop boards that expect unbuffered modules. The DDR3L 1.35V specification is backward compatible with 1.5V DDR3 slots, but the system must accept ECC RDIMMs to use the error-correction and registration features.

Check your server before ordering

Verify that your system lists the HP part numbers above or explicitly supports DDR3L 1333MHz ECC RDIMM 1Rx4 modules. Confirm the motherboard has 240-pin DIMM slots and accepts registered memory, as consumer platforms typically do not. Matching the exact rank and voltage avoids boot failures.

特長

  • ECC protection safeguards data integrity with registered DDR3L error correction
  • Low 1.35V DDR3L voltage reduces server power draw and heat
  • 1333MHz PC3L-10600 speed delivers responsive performance for virtualised workloads
  • 1Rx4 registered DIMM architecture enables stable high-density memory configurations
  • 240-pin DDR3 form factor fits compatible HP ProLiant and workstation platforms

仕様

BrandA-Tech
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Is this a single 4GB module or a kit of multiple sticks?

This listing is for one 4GB DDR3L module running at 1333MHz with CL9 latency and 1.35V operation.

Will the registered ECC design slow down my workstation compared to standard unbuffered memory?

The registered buffer adds one clock cycle of latency, but it allows the memory controller to drive more modules reliably at 1333MHz without signal degradation.

My motherboard has 240-pin DDR3 slots — does the DDR3L 1.35V spec limit the speed I will actually see?

The module is rated for PC3L-10600 at 1333MHz; it will run at that speed provided the platform supports DDR3L voltage and registered DIMMs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。