暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 4GB DDR3L 1600 ECC SODIMM 1.35V 1Rx8

SKU CH-XVNT-5NEEW

A 4 GB DDR3L SODIMM with ECC error correction for compatible microservers and NAS units

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 4GB

Speed DDR3L 1600 (PC3L 12800)

CAS Latency CL11

  • ECC protection guards data integrity for critical workloads
  • 1600 MHz DDR3L speed accelerates loading and multitasking
  • 35 V low-voltage design reduces power draw and heat
  • Single-rank 1Rx8 layout ensures broad compatibility with ECC SODIMM slots
  • 204-pin SO-DIMM form factor fits microserver, NAS and mobile workstation bays

4GB DDR3L ECC SODIMM for servers

This A-Tech module adds 4GB of DDR3L 1600 memory with ECC protection to compatible microservers, mobile workstations and NAS devices. It runs at 1.35V low voltage and fits 204-pin SO-DIMM slots. The single-rank 1Rx8 design uses CL11 latency for stable operation in ECC-enabled platforms.

Replaces non-ECC or lower-capacity DDR3 SODIMMs

Swapping standard unbuffered DDR3 SODIMMs for this ECC version adds error correction that guards against data corruption in always-on server and NAS workloads. The upgrade is worthwhile when your system board explicitly supports DDR3L ECC unbuffered modules and you need the 1.35V operating voltage.

Suits ECC-capable DDR3L laptops and microservers

Builders maintaining DDR3L ECC platforms such as older microservers, mobile workstations or NAS appliances will find this module a direct fit. Systems that lack ECC support in the chipset or BIOS, or that require registered DIMMs instead of unbuffered SODIMMs, cannot use this memory.

特長

  • ECC protection guards data integrity for critical workloads
  • 1600 MHz DDR3L speed accelerates loading and multitasking
  • 35 V low-voltage design reduces power draw and heat
  • Single-rank 1Rx8 layout ensures broad compatibility with ECC SODIMM slots
  • 204-pin SO-DIMM form factor fits microserver, NAS and mobile workstation bays

仕様

BrandA-Tech
SeriesA-Tech DDR3 ECC SODIMM
ModelA-Tech 4GB 1Rx8 PC3L-12800 ECC SODIMM
Part NumberNE-SS-0558
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 204-pin DDR3L SODIMM fit my laptop's memory slot?

The module uses the standard 204-pin SO-DIMM form factor, so it fits any laptop or microserver slot wired for DDR3 or DDR3L ECC unbuffered memory.

What is the correct way to seat this ECC SODIMM so the system recognises it?

Align the notch with the slot key, insert the module fully until the gold contacts are no longer visible, then press down evenly until both retention clips snap into place.

Does the 1Rx8 single-rank design affect future upgrades or module mixing?

Single-rank 1Rx8 modules place less electrical load on the memory controller, making them easier to pair with additional sticks when expanding capacity later.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。