暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3L UDIMM module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3L 1600 ECC UDIMM 2Rx8 1.35V for Hynix HMT351U7CFR8A-PB HMT351U7EFR8A-PB Server Memory

SKU CH-9H5K-HSNC9

4GB DDR3L 1600 ECC unbuffered DIMM with 2Rx8 organisation and 1.35V low-voltage operation

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection prevents data errors in server workloads
  • 35V DDR3L reduces power draw versus standard DDR3
  • 1600 MHz CL11 speed handles demanding multitasking
  • 2Rx8 dual-rank layout boosts memory bandwidth
  • 240-pin UDIMM form factor fits compatible server boards

Server ECC UDIMM for Hynix replacement

This A-Tech 4 GB module is a direct equivalent for Hynix HMT351U7CFR8A-PB and HMT351U7EFR8A-PB parts. It targets administrators who need to add or replace DDR3L ECC memory in compatible server or workstation platforms without changing voltage or form factor.

240-pin DDR3L 1.35 V unbuffered design

The stick uses a standard 240-pin DIMM edge connector and operates at 1.35 V, matching the low-voltage DDR3L specification. Unbuffered ECC topology with 2Rx8 organisation means it slots straight into boards that accept UDIMM ECC modules, leaving registered DIMM slots for other configurations.

Upgrades non-ECC or lower-capacity DDR3L UDIMMs

Replacing non-ECC DDR3L UDIMMs with this module adds error correction for data integrity in always-on workloads. The jump is worthwhile when the platform supports ECC UDIMM and the current population leaves free 240-pin slots for the 4 GB capacity increase.

特長

  • ECC protection prevents data errors in server workloads
  • 35V DDR3L reduces power draw versus standard DDR3
  • 1600 MHz CL11 speed handles demanding multitasking
  • 2Rx8 dual-rank layout boosts memory bandwidth
  • 240-pin UDIMM form factor fits compatible server boards

仕様

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

What DDR standard and peak transfer rate does this DDR3L 1600 module use?

This module uses the DDR3L standard at 1600 MHz with a PC3L-12800 rating, capping the peak transfer rate at that specification.

What physical slot and pin count does this 240-pin DIMM require?

It fits a standard DDR3 DIMM slot with 240 pins and the low-profile UDIMM form factor used in servers and workstations.

How is this ECC UDIMM installed and what step is often missed?

Power down, open the chassis, align the notch on the 240-pin edge connector with the slot key, press firmly until both retention clips click, then enable ECC in the system BIOS.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。