暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, gold edge connector, thin rectangular stick

A-Tech

A-Tech 4GB DDR3L 1600MHz SODIMM 1.35V CL11 204-Pin

SKU CH-VDJN-XM297

A 4 GB DDR3L SODIMM running at 1600 MHz and 1.35 V to upgrade laptop memory capacity

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 4GB capacity boosts multitasking headroom for everyday workloads
  • DDR3L 1600MHz speed accelerates data transfer rates
  • 35V low voltage reduces power draw and heat
  • 204-pin SODIMM form factor fits standard laptop slots
  • CL11 latency delivers responsive memory access

Direct Replacement for Elpida EBJ40UG8EFU0-GN-F

This A-Tech module is a 4GB DDR3L SODIMM built to match the Elpida EBJ40UG8EFU0-GN-F and EBJ40UG8EFU5-GNL-F part numbers. It targets laptop and all-in-one owners who need a like-for-like memory upgrade without changing voltage or pin layout. The stick runs at 1.35V and uses the standard 204-pin SO-DIMM form factor.

Upgrades from lower-capacity

If your system currently uses a 2GB module or a 1.5V DDR3 stick at the same speed, this 4GB CL11 unit doubles capacity while dropping to the lower DDR3L voltage. The jump is worth it when the platform supports 1.35V operation and has a free 204-pin slot, letting you handle heavier multitasking without exceeding the memory controller's voltage spec.

Fits laptops and AIOs with a DDR3L 1600MHz slot

The module requires a 204-pin SO-DIMM socket wired for DDR3L 1600 (PC3L-12800) and an unbuffered non-ECC memory controller. It frees up the higher-voltage headroom that a 1.5V module would consume, which can help thermal margins in thin chassis. Buyers who need ECC, registered buffering, or a different pin count such as 262-pin should look elsewhere.

特長

  • 4GB capacity boosts multitasking headroom for everyday workloads
  • DDR3L 1600MHz speed accelerates data transfer rates
  • 35V low voltage reduces power draw and heat
  • 204-pin SODIMM form factor fits standard laptop slots
  • CL11 latency delivers responsive memory access

仕様

BrandA-Tech
SeriesCompatible Replacement for Elpida
ModelEBJ40UG8EFU0-GN-F, EBJ40UG8EFU5-GNL-F
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesEBJ40UG8EFU0-GN-F, EBJ40UG8EFU5-GNL-F
Recommend UseCompatible Replacement for Elpida EBJ40UG8EFU0-GN-F, EBJ40UG8EFU5-GNL-F

この商品に関する質問

Will the 204-pin DDR3L SODIMM fit my laptop's memory slot?

This module uses the standard 204-pin SO-DIMM form factor for DDR3L memory. It fits laptops, notebooks, and all-in-one systems that accept DDR3L 1600MHz unbuffered non-ECC modules.

Do I need to configure anything in BIOS after installing the 1.35V CL11 module?

Installation is plug-and-play. Insert the module at an angle into the slot until the clips click. The system detects the 1600MHz speed and 1.35V voltage automatically; no BIOS changes are required.

How do I know when the 4GB DDR3L module should be replaced?

DDR3L memory has no moving parts and requires no routine maintenance. Replace it only if memory diagnostics report errors or if you upgrade to a higher-capacity kit supported by your system.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。