暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR4 DIMM module with gold contacts and black chips

A-Tech

A-Tech 4GB DDR4 2400MHz CL17 ECC RDIMM 1Rx8 Server Memory

SKU CH-YYTG-SKTAW

A 4GB DDR4 2400MHz ECC registered DIMM with CL17 latency and 1.2V operation for server and workstation upgrades

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors in servers
  • CL17 latency at 2400MHz DDR4 speed
  • Registered DIMM design supports stable multi-module configs
  • 20V operation reduces power draw and heat
  • 288-pin DDR4 form factor fits server motherboards

Server DDR4 ECC RDIMM module

This 4 GB registered DIMM runs at 2400 MHz with CL17 latency and 1.20 V operation. It is built for servers and workstations that require error-correcting memory. The 1Rx8 organisation and 288-pin form factor match the Kingston KVR24R17S8/4 specification. Systems needing registered ECC DDR4 can use this module as a direct replacement.

Standard voltage and registered design

Operating at the DDR4 standard 1.20 V keeps power draw low in normal use. The registered buffer reduces electrical load on the memory controller, which helps stability in multi-module configurations. No special cooling is required beyond typical server airflow. The module meets JEDEC electrical specifications for its speed grade.

Replaces non-ECC or slower DDR4 DIMMs

This module upgrades systems that currently run unbuffered non-ECC memory or lower-speed DDR4 where the platform supports registered ECC. The jump is worth it when data integrity and multi-DIMM stability are required for virtualisation, databases or long-running compute tasks. It is not for desktop boards that lack registered ECC support or for builds needing higher capacity per slot.

特長

  • ECC protection prevents data errors in servers
  • CL17 latency at 2400MHz DDR4 speed
  • Registered DIMM design supports stable multi-module configs
  • 20V operation reduces power draw and heat
  • 288-pin DDR4 form factor fits server motherboards

仕様

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKVR24R17S8/4
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesKVR24R17S8/4

この商品に関する質問

How do I install this 288-pin DDR4 RDIMM, and what step do people often miss?

Align the notch on the module with the slot key, press down firmly until both side clips click shut, and ensure the motherboard is set to 1.2V in BIOS for correct DDR4 voltage.

What maintenance or replacement will this ECC RDIMM need over time?

No routine maintenance is required; the module is tested for lifetime reliability and should only be replaced if system diagnostics report correctable or uncorrectable memory errors.

What limit appears first when this CL17 2400MHz module runs under sustained load?

The CAS latency of 17 cycles at 2400MHz sets the timing floor, so sustained throughput is bounded by the rated DDR4-2400 transfer rate and registered buffer overhead.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。