暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 registered DIMM with black chips and silver contacts

A-Tech

A-Tech 4GB DDR4 2400MHz ECC RDIMM 1Rx8 CL17 1.2V Server Memory

SKU CH-VPEW-ZPZX0

4GB DDR4 2400MHz ECC registered DIMM with CL17 latency and 1.2V operation for server workloads

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 2400MHz operation
  • CL17 latency delivers responsive server performance at 1.2V standard voltage
  • 288-pin RDIMM form factor fits compatible HP T9V38AA workstation slots
  • Single-rank 1Rx8 organisation optimises memory controller efficiency for stable workloads
  • Major-brand chipset ensures dependable reliability through rigorous quality testing

4GB DDR4 2400MHz ECC RDIMM

This 4GB DDR4 2400MHz ECC RDIMM module uses a 1Rx8 registered design with CL17 latency and 1.20V operation. It is built for servers and workstations that require error-correcting registered memory. The 288-pin DIMM fits standard DDR4 slots in compatible enterprise systems.

Suited for HP T9V38AA replacement

This module suits administrators replacing or expanding memory in systems that accept DDR4 2400 ECC RDIMM 1Rx8 parts. It is not for desktop PCs that only support unbuffered non-ECC memory. Buyers who need higher capacity per slot or faster speeds should look at other modules.

Straightforward DIMM installation

Installation follows standard DDR4 DIMM procedure: align the 288-pin module with the slot key and press until the latches engage. The registered buffer adds electrical load, so the motherboard must support registered DIMMs. The most common issue is purchasing ECC RDIMM for a board that only accepts unbuffered UDIMM.

特長

  • ECC protection prevents data corruption with registered DDR4 2400MHz operation
  • CL17 latency delivers responsive server performance at 1.2V standard voltage
  • 288-pin RDIMM form factor fits compatible HP T9V38AA workstation slots
  • Single-rank 1Rx8 organisation optimises memory controller efficiency for stable workloads
  • Major-brand chipset ensures dependable reliability through rigorous quality testing

仕様

BrandA-Tech
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

What motherboard slot and DDR generation are required for this 288-pin DDR4 2400 ECC RDIMM?

A server or workstation motherboard with DDR4 DIMM slots that accept registered ECC modules at 1.2 V.

Will this CL17 1Rx8 registered ECC module operate with existing DDR4 RDIMMs of a different speed grade in the same system?

The system will run all installed modules at the speed of the slowest kit; verify the platform supports mixed-speed registered ECC populations.

How can I confirm the module is recognised at 2400 MT/s with ECC active after installation?

Check BIOS/UEFI memory information or the OS memory report for 2400 MT/s speed, ECC enabled status and the correct 4 GB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。