暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 64GB (8x8GB) DDR4 2933 ECC RDIMM 1Rx8 Server RAM

SKU CH-YAYR-44CSN

Eight 8 GB DDR4 2933 MHz registered ECC DIMMs add 64 GB of error-correcting server memory at 1.2 V

  • Capacity64GB (8 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 64GB (8 x 8GB)

  • 64 GB total capacity across eight modules for high-density server workloads
  • DDR4 2933 MHz speed with PC4-23400 bandwidth for fast data throughput
  • ECC registered design with single-rank x8 organisation for error correction and signal integrity
  • 2 V standard DDR4 voltage for efficient power consumption
  • 288-pin RDIMM form factor fits compatible server and workstation memory slots

Server-grade capacity for multi-socket platforms

This 64 GB kit delivers eight 8 GB DDR4 registered DIMMs rated at 2933 MHz with CL21 latency. ECC and register circuitry protect data integrity in workloads that cannot tolerate silent corruption. The modules are built for servers and workstations that require registered memory; they will not function in desktop or laptop systems.

Standard-voltage operation at 1.2 V

Each module runs at the JEDEC-standard 1.2 V, keeping power draw predictable in fully populated chassis. Registered buffering reduces electrical load on the memory controller, which helps maintain stable thermals when all channels are filled. No additional cooling beyond normal server airflow is required for specified operation.

Replaces lower-capacity or non-ECC kits

Upgrading from smaller registered sets or unbuffered ECC modules adds the headroom needed for virtualization, large databases or compute clusters. The jump is worthwhile when the platform supports 2933 MHz registered DIMMs and the workload exceeds the current memory ceiling. Verify the system’s qualified-vendor list before installation.

特長

  • 64 GB total capacity across eight modules for high-density server workloads
  • DDR4 2933 MHz speed with PC4-23400 bandwidth for fast data throughput
  • ECC registered design with single-rank x8 organisation for error correction and signal integrity
  • 2 V standard DDR4 voltage for efficient power consumption
  • 288-pin RDIMM form factor fits compatible server and workstation memory slots

仕様

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 1Rx8 PC4-2933Y-R
Capacity64GB (8 x 8GB)
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install these 288-pin DDR4 RDIMMs, and what step do people often miss?

Insert each 1Rx8 module into the correct server DIMM slot following the manual’s channel order, then press firmly until the ejector clips lock; the step often missed is verifying the populated-channel sequence for registered memory.

What maintenance or replacement will this 64 GB kit need later?

No routine maintenance is required; if a module fails, replace the single 8 GB stick — ECC error logs will identify the faulty rank.

What limit appears first under sustained load with these CL21 1.20 V modules?

The CAS latency of 21 cycles at 2933 MHz sets the timing floor; sustained workloads hit that latency ceiling before voltage or thermal limits become a factor.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。